• Blixt&Dunder - precis som det låter
  • Undrar du något? Prova chatten!
Exkl. moms Inkl. moms

Logga in

Feuling Dipstick Vented Pol 07+Fl Dipstick Vented Pol 07+Fl i gruppen Reservdelar & Tillbehör / Tankar / Oljetankar & Tillbehör / Påfyllningslock Oljetank hos Blixt&Dunder AB (07100265)
Feuling Dipstick Vented Pol 07+Fl Dipstick Vented Pol 07+Fl

Feuling Dipstick Vented Pol 07+Fl Dipstick Vented Pol 07+Fl

Feuling
Betyg på Feuling Dipstick Vented Pol 07+Fl Dipstick Vented Pol 07+Fl i gruppen Reservdelar & Tillbehör / Tankar / Oljetankar & Tillbehör / Påfyllningslock Oljetank hos Blixt&Dunder AB
5170 kr
 
Köp trots längre leveranstid
Artikelnummer: 07100265
Leveranstid:


Vented Dipstick

  • Billet dipsticks vent/breathe excessive crank case pressure from the oil tank through a PCV style breather, consisting of an oil separator system, perforated disc, replaceable filter element and umbrella flapper valve
  • Screws into the factory oil fill spout as a stock replacement part
  • Blowby is pressure that is forced past the rings and cylinders, pushed into the crankcase and then forced into the oil tank
  • Fueling test results show a decrease in engine oil sump levels, more freely/smoothe revving engine and increased MPG and decreased blowby
  • Removes unwanted build-up of blow by pressure in the oil tank
  • There are two ways to read the oil level with this dipstick, with the bike on the jiffy stand (FHS) Full Hot Stand or the bike upright and level (FHU) Full Hot Upright
  • This dipstick does get hot, use a glove when checking oil level
  • Includes 2 different venting style options for installing the dipstick: option 1 - 1/8 NPT breather vent fitting with internal porous filter element, option 2 - quick disconnect coupler fitting with rubber hose and filter element
  • It is important to get the correct hot oil level in your bike. Feuling recommends running the oil level 90%-99% full when hot
  • The oil pick up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank
  • Made in the U.S.A.


  • Color/Finish: Polished
    Product Name: Vented Dipstick
    Units: Each
    Base Color: Silver



    Enhet: Sats
    Material: Aluminum
    Produkt-typ: Oil Dipstick
    Tillverkarens Art. Nr.: 3091
    Färg: Polished
    Vented Dipstick

  • Billet dipsticks vent/breathe excessive crank case pressure from the oil tank through a PCV style breather, consisting of an oil separator system, perforated disc, replaceable filter element and umbrella flapper valve
  • Screws into the factory oil fill spout as a stock replacement part
  • Blowby is pressure that is forced past the rings and cylinders, pushed into the crankcase and then forced into the oil tank
  • Fueling test results show a decrease in engine oil sump levels, more freely/smoothe revving engine and increased MPG and decreased blowby
  • Removes unwanted build-up of blow by pressure in the oil tank
  • There are two ways to read the oil level with this dipstick, with the bike on the jiffy stand (FHS) Full Hot Stand or the bike upright and level (FHU) Full Hot Upright
  • This dipstick does get hot, use a glove when checking oil level
  • Includes 2 different venting style options for installing the dipstick: option 1 - 1/8 NPT breather vent fitting with internal porous filter element, option 2 - quick disconnect coupler fitting with rubber hose and filter element
  • It is important to get the correct hot oil level in your bike. Feuling recommends running the oil level 90%-99% full when hot
  • The oil pick up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank
  • Made in the U.S.A.


  • Color/Finish: Polished
    Product Name: Vented Dipstick
    Units: Each
    Base Color: Silver

    Kundomdömen