• Blixt&Dunder - precis som det låter
  • Undrar du något? Prova chatten!
Exkl. moms Inkl. moms

Logga in

Andrews Camshaft 1 #1 Cam F/70-E77 Shovelhed i gruppen  hos Blixt&Dunder AB (DS199282)
Andrews Camshaft 1 #1 Cam F/70-E77 Shovelhed

Andrews Camshaft 1 #1 Cam F/70-E77 Shovelhed

Andrews
Betyg på Andrews Camshaft 1 #1 Cam F/70-E77 Shovelhed i gruppen  hos Blixt&Dunder AB
3560 kr
 
Lägg i varukorgen
Artikelnummer: DS199282
Leveranstid:


Low-Compression Cam

  • Designed with a combination of shorter durations and higher lifts to offer the advantages of a broad torque output through the entire rpm range
  • Designed for hydraulics, but could be run with solids
  • Grind #1 is the low-compression version of an "A" grind cam for 74" and 80" models
  • Made in the U.S.A.
  • On late 77 and later engines, the pitch diameter on the camshaft, pinion gear and breather valve gear was changed. These components are not interchangeable with earlier style components unless replaced in sets only. Late 77 and later gear sets are identified by a circular groove machined in the outer face of the cam gear.


  • Grind #1 is the low-compression version of an "A" grind cam for 74" and 80" models

    Exhaust Lift: Shovel: 0,427" Pan: 0,450"
    Intake Open: 16°

    Enhet: Styck
    Produkt-typ: Cam
    Tillverkarens Art. Nr.: 212140
    Low-Compression Cam

  • Designed with a combination of shorter durations and higher lifts to offer the advantages of a broad torque output through the entire rpm range
  • Designed for hydraulics, but could be run with solids
  • Grind #1 is the low-compression version of an "A" grind cam for 74" and 80" models
  • Made in the U.S.A.
  • On late 77 and later engines, the pitch diameter on the camshaft, pinion gear and breather valve gear was changed. These components are not interchangeable with earlier style components unless replaced in sets only. Late 77 and later gear sets are identified by a circular groove machined in the outer face of the cam gear.


  • Grind #1 is the low-compression version of an "A" grind cam for 74" and 80" models

    Exhaust Lift: Shovel: 0,427" Pan: 0,450"
    Intake Open: 16°

    Kundomdömen

    Se fler varor