• Blixt&Dunder - precis som det låter
  • Undrar du något? Prova chatten!
Exkl. moms Inkl. moms

Logga in

S&S  Engine T111 Blk 07-16 i gruppen Reservdelar & Tillbehör / Motordelar  / Kompletta Motorer hos Blixt&Dunder AB (09010238)
S&S  Engine T111 Blk 07-16

S&S Engine T111 Blk 07-16

S&S
Betyg på S&S  Engine T111 Blk 07-16 i gruppen Reservdelar & Tillbehör / Motordelar  / Kompletta Motorer hos Blixt&Dunder AB
115230 kr
 
Lägg i varukorgen
Artikelnummer: 09010238
Leveranstid:


"T111 Long-Block Engine

  • Super stock heads and crankcase
  • S&,S easy start cams
  • High-flow oil pump
  • Forged flattop pistons
  • Intake system not included, compatible with stock or aftermarket intake systems
  • 4-1/8 bore x 4-1/8 stroke
  • 9.8:1 compression ratio
  • Wrinkle black finish
  • Cylinder heads on T-Series long block engines are 99-05 style. Owners of 06 models will need to purchase a set of 99-05 style, offset intake flanges.
  • Cylinder heads on these engines are specially machined to compensate for the non-stock cylinder length. As a result, they are compatible with manifolds and throttle bodies with stock length intake runners. In addition, the breather vent bolt locations have been adjusted so they are in the stock location, so stock style air cleaner back plates will bolt up to these engines.


  • Will require the use of oil line kit 0711-0220

    Enhet: Styck
    Produkt-typ: Engine
    Tillverkarens Art. Nr.: 310-0402A
    Färg: Chrome- Wrinkle Black
    "T111 Long-Block Engine

  • Super stock heads and crankcase
  • S&,S easy start cams
  • High-flow oil pump
  • Forged flattop pistons
  • Intake system not included, compatible with stock or aftermarket intake systems
  • 4-1/8 bore x 4-1/8 stroke
  • 9.8:1 compression ratio
  • Wrinkle black finish
  • Cylinder heads on T-Series long block engines are 99-05 style. Owners of 06 models will need to purchase a set of 99-05 style, offset intake flanges.
  • Cylinder heads on these engines are specially machined to compensate for the non-stock cylinder length. As a result, they are compatible with manifolds and throttle bodies with stock length intake runners. In addition, the breather vent bolt locations have been adjusted so they are in the stock location, so stock style air cleaner back plates will bolt up to these engines.


  • Will require the use of oil line kit 0711-0220

    Kundomdömen