• Blixt&Dunder - precis som det låter
  • Undrar du något? Prova chatten!
Exkl. moms Inkl. moms

Logga in

Andrews Gage Pins 0.105
Andrews Gage Pins 0.105

Andrews Gage Pins 0.105" Andrews .105" Gage Pins

Andrews
Betyg på Andrews Gage Pins 0.105
350 kr
 
Lägg i varukorgen
Artikelnummer: DS199105
Leveranstid:


Gauge Pins

  • Used to measure the outside diameter of cam drive gears
  • Made in the U.S.A.
  • There are two basic differences between 90-99 cam gear sizes and earlier years. The overall range of gear pin measurements (from the largest gears to the smallest) was reduced in '90 from .006" to .003". The large gears are the same size for both 84-89 and 90-99 (green and black color codes). Gear size measurements (over pins) are listed in the 1990 H-D manual using .108" pins instead of .105" pins (as for earlier years). For the same gear, measurement over .108" pins will be approximately .012" larger than for .105" pins. For 92 engines, stock cam gears are interchangeable with earlier versions but gear outer diameters have been reduced by .025".


  • Application: Camshaft
    Color/Finish: Silver
    Product Name: Pin
    Units: Pair
    Measurement System: SAE
    Material: Alloy Steel
    Type: Gauge



    Enhet: Par
    Material: Alloy Steel
    Produkt-typ: Pin
    Tillverkarens Art. Nr.: 212105
    Färg: Silver
    Gauge Pins

  • Used to measure the outside diameter of cam drive gears
  • Made in the U.S.A.
  • There are two basic differences between 90-99 cam gear sizes and earlier years. The overall range of gear pin measurements (from the largest gears to the smallest) was reduced in '90 from .006" to .003". The large gears are the same size for both 84-89 and 90-99 (green and black color codes). Gear size measurements (over pins) are listed in the 1990 H-D manual using .108" pins instead of .105" pins (as for earlier years). For the same gear, measurement over .108" pins will be approximately .012" larger than for .105" pins. For 92 engines, stock cam gears are interchangeable with earlier versions but gear outer diameters have been reduced by .025".


  • Application: Camshaft
    Color/Finish: Silver
    Product Name: Pin
    Units: Pair
    Measurement System: SAE
    Material: Alloy Steel
    Type: Gauge

    Kundomdömen