Artikelnummer: 09250145
"Chain Driven Cam
Allow you to upgrade your 99-06 Twin Cam (except 06 Dyna Glide) to the newer roller-style cam chains and replaces the spring tension cam chain adjusters with the later-style hydraulic adjusters for longer lifeCam grinds listed are designed to be used with stock lifters, they require the installation of a 07-17 cam plate, oil pump, cam sprockets and chains, and both hydraulic chain adjusters (these parts are not included and must be purchased separately)A list of required components is supplied with each set of camsPerformance should be similar to earlier bikes with the same cam grindsMade in the U.S.A.99-06 Twin Cam motors (except 06 Dyna Glide) cannot use the 07-17 cams, as the bearing journal on the earlier motors is .875" in diameter and the 07-17 cams are 1.000" in diameter. The "N" series of cams feature the .875" bearing journal, yet still accept the new style cam support plate99-01 model motors must use the Andrews rear cam sprocket Drag part #0925-0147. 2002-2006 models must use the stock rear cam sprocket, OEM #25728-06Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearanceDesigned for easy installation in 95 inch motors with stock heads
Enhet: | Par |
Produkt-typ: | Cam Kit |
Tillverkarens Art. Nr.: | 216850 |
"Chain Driven CamAllow you to upgrade your 99-06 Twin Cam (except 06 Dyna Glide) to the newer roller-style cam chains and replaces the spring tension cam chain adjusters with the later-style hydraulic adjusters for longer lifeCam grinds listed are designed to be used with stock lifters, they require the installation of a 07-17 cam plate, oil pump, cam sprockets and chains, and both hydraulic chain adjusters (these parts are not included and must be purchased separately)A list of required components is supplied with each set of camsPerformance should be similar to earlier bikes with the same cam grindsMade in the U.S.A.99-06 Twin Cam motors (except 06 Dyna Glide) cannot use the 07-17 cams, as the bearing journal on the earlier motors is .875" in diameter and the 07-17 cams are 1.000" in diameter. The "N" series of cams feature the .875" bearing journal, yet still accept the new style cam support plate99-01 model motors must use the Andrews rear cam sprocket Drag part #0925-0147. 2002-2006 models must use the stock rear cam sprocket, OEM #25728-06Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearanceDesigned for easy installation in 95 inch motors with stock heads