Artikelnummer: 09250117
"Grind Cam
Cams work well with fuel injection or carburetor modelsRun best with low restriction exhausts (1700-5200 rpm)Works well with carbs or fuel injectionBolt-in cam for more torque with stock compressionCan be used with stock valve springs and tappetsSimilar to the EV-23 camAll Andrews gear-driven cams require four-gear set for installation (DS-199532 for 99-06 applications, 0925-0166 or 0925-0152 for 07-17 Twin Cam and 06 Dyna applications).Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.59G, 60G and 64G cams are for highly tuned engines and require the knowledge of an expert engine builder for proper setup and installation.Designed for 95"+ motors with 9.25:1 compression to 9.50:1 compression ratio and stock heads
Enhet: | Sats |
Produkt-typ: | Cam Kit |
Tillverkarens Art. Nr.: | 216350 |
"Grind CamCams work well with fuel injection or carburetor modelsRun best with low restriction exhausts (1700-5200 rpm)Works well with carbs or fuel injectionBolt-in cam for more torque with stock compressionCan be used with stock valve springs and tappetsSimilar to the EV-23 camAll Andrews gear-driven cams require four-gear set for installation (DS-199532 for 99-06 applications, 0925-0166 or 0925-0152 for 07-17 Twin Cam and 06 Dyna applications).Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.59G, 60G and 64G cams are for highly tuned engines and require the knowledge of an expert engine builder for proper setup and installation.Designed for 95"+ motors with 9.25:1 compression to 9.50:1 compression ratio and stock heads