Artikelnummer: 09250521
Easy Start Cam Kit for Twin Cam
Start any engine regardless of displacement or compression ratio with a stock starterSave your starter and battery, tested for 10,000 starts without running battery downAllow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performanceAll chain-drive cams include installation kitAll gear-drive cams include 4-gear set and installation kitFor 88/95/96/103 cubic-inch enginesCompression ratios below 10:1Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.Due to the inherent characteristics of gear drives, you may experience more valve train noise.Not for models with OEM compression releases.Made in the U.S.A.'99 - '04 models require hi-lift valve springs.
Exhaust Lift at TDC: 0,170"
Intake Duration: 215°
| Enhet: | Sats |
| Produkt-typ: | Cam Kit |
| Tillverkarens Art. Nr.: | 106-5293 |
Easy Start Cam Kit for Twin CamStart any engine regardless of displacement or compression ratio with a stock starterSave your starter and battery, tested for 10,000 starts without running battery downAllow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performanceAll chain-drive cams include installation kitAll gear-drive cams include 4-gear set and installation kitFor 88/95/96/103 cubic-inch enginesCompression ratios below 10:1Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.Due to the inherent characteristics of gear drives, you may experience more valve train noise.Not for models with OEM compression releases.Made in the U.S.A.'99 - '04 models require hi-lift valve springs.Exhaust Lift at TDC: 0,170"
Intake Duration: 215°
