• Blixt&Dunder - precis som det låter
  • Undrar du något? Prova chatten!
Exkl. moms Inkl. moms

Logga in

La Choppers 10
La Choppers 10
La Choppers 10
LA-Choppers

La Choppers 10" Bagger Twin Peaks Ape Hanger - 1.25" Chrome Handlebar

Betyg på La Choppers 10
6540 kr
 
Lägg i varukorgen
Artikelnummer: 06012697
Leveranstid:


1-1/4 Twin Peaks Touring Handlebar

  • Handlebars with an emphasis on touring comfort
  • More parallel wrist angles for a perfect pullback angle and stress-free riding
  • Flowing bends on the uprights designed specifically for Batwing fairing bikes
  • Drilled for internal wiring
  • Works with hydraulic clutches
  • Can be used on cable and TBW (Throttle By Wire) applications
  • Made in the U.S.A.
  • Accepts H-D OEM heated grips.


  • Base Color: Silver
    Units: Each
    Width: 85 cm (33-1/2 )
    Clamping Diameter: 25,4 mm (1 )
    Material: Steel
    Controls Diameter: 25,4 mm (1 )
    Pullback/Sweep: 13,5 cm (5-1/4 )
    Color/Finish: Chrome
    Center Width: 30,5 cm (12 )
    Product Name: Handlebar
    Type/Bend: Ape Hanger| Touring| Twin Peaks
    Base Finish: Chrome
    Handlebar Diameter: 32 mm (1-1/4 )
    End Rise: 25,5 cm (10 )
    Features: Accepts Heated Grips| For Hydraulic Clutch| Knurled Center| Notched for Throttle-By-Wire| Pre-Drilled



    Enhet: Styck
    Material: Steel
    Produkt-typ: Handlebar
    Tillverkarens Art. Nr.: LA-7361-10
    Färg: Silver
    "1-1/4"" Twin Peaks Touring Handlebar

  • Handlebars with an emphasis on touring comfort
  • More parallel wrist angles for a perfect pullback angle and stress-free riding
  • Flowing bends on the uprights designed specifically for Batwing fairing bikes
  • Drilled for internal wiring
  • Work with hydraulic clutches
  • Can be used on cable and TBW (Throttle By Wire) applications
  • Accept H-D OEM heated grips.
  • Made in the U.S.A.


  • "
    1-1/4 Twin Peaks Touring Handlebar

  • Handlebars with an emphasis on touring comfort
  • More parallel wrist angles for a perfect pullback angle and stress-free riding
  • Flowing bends on the uprights designed specifically for Batwing fairing bikes
  • Drilled for internal wiring
  • Works with hydraulic clutches
  • Can be used on cable and TBW (Throttle By Wire) applications
  • Made in the U.S.A.
  • Accepts H-D OEM heated grips.


  • Base Color: Silver
    Units: Each
    Width: 85 cm (33-1/2 )
    Clamping Diameter: 25,4 mm (1 )
    Material: Steel
    Controls Diameter: 25,4 mm (1 )
    Pullback/Sweep: 13,5 cm (5-1/4 )
    Color/Finish: Chrome
    Center Width: 30,5 cm (12 )
    Product Name: Handlebar
    Type/Bend: Ape Hanger| Touring| Twin Peaks
    Base Finish: Chrome
    Handlebar Diameter: 32 mm (1-1/4 )
    End Rise: 25,5 cm (10 )
    Features: Accepts Heated Grips| For Hydraulic Clutch| Knurled Center| Notched for Throttle-By-Wire| Pre-Drilled

    Kundomdömen

    Se fler varor

    La Choppers 1.5"  Rear Lowering Kit Black For Victory Lowering Kit Vic
    Rear Suspension Lowering Kit

    Replace the stock suspension armsGive your bike the low look witho...
    1910 kr
    La Choppers 38,1 Mm (1-1/2") Riser For 38 Mm (1-1/2") Handlebars Natur
    Handlebar Riser Extension

    The simple solution to adding a little rise and pullback to your hand...
    1060 kr