Udstødning Vance & Hines 2 1 RR PCX sort 114" FLT/Touring 17-24

17 112 DKK

Vance & Hines 2-1 Hi-Output RR PCX udstødning i matsort finish
Læs mere

955838 Vance & Hines
  • Fremstillet i højkvalitets 304 rustfrit stål med matsort keramisk belægning
  • Hånd-TIG-svejsede headers, der trapper op fra 1.75" til 1.875" til 2.0"
  • Samme overdimensionerede samler som på racersystemet, vinklet for øget frihøjde og hældningsvinkel
  • Mellemlang 4" Hi-Output megafon-lyddæmper med nittet emblem i dobbelte laserskårne lag
  • PCX (Power Chamber Exhaust)-teknologi med kammerdæmpet højflowkatalysator
  • Giver øget drejningsmoment i mellemregistret samt op til 20 % mindre varme ved fodbrætter/fodhvilere og 50 % mindre varme ved samleren
  • Passer med standard (ikke forlængede) sidetasker

Passer til M8 Touring. Valgfri rustfri varmebeskyttelse sælges separat (97492 børstet eller 974973 sort keramisk). For EU-modeller fra 2021 og frem (Euro 5 med 3–4 lambdasonder) kan FuelPak FP4 (art.nr. 942227) bruges til at deaktivere de bageste lambdasonder uden fejlkoder.

Passer til: 114" FLT/Touring 17-24

2-1 hi output RR PCX exhaust. black

  • Matte black ceramic coated finished 304 stainless steel
  • Comes with PCX Chambered High-Flow catalyst cartridge
  • Inspired by the Vance & Hines Race team competing in the King of the Baggers class of the MotoAmerica Road Racing Championships, the Hi-Output RR (Race Replica) captures every pulse-quickening element of the racing exhaust system into one you can put on your M8 Touring model as part of your own performance bagger build
  • Constructed of high grade 304 stainless steel, the hand TIG welded headers of the Hi-Output RR step from 1.75" to 1.875" to 2.0" and feed into the same oversized collector used on the race system
  • The collector is even rotated to add extra ground clearance to enable steeper lean angles through the turns
  • Finishing off the system with the mid-length 4" Hi-Output megaphone emblazoned with the same double-layered laser-cut riveted badge from the race system and features the V&H innovative PCX technology, which integrates a chambered high-flow catalyst for a bigger boost in torque off the line and pull out of the corners
  • PCX (Power Chamber Exhaust) technology
  • Fits with standard (non-stretched) saddlebags
  • Vance & Hines innovative PCX Technology explained: More Power & Less Heat
  • Used to increase mid-range torque for more responsive acceleration off the line
  • They are positioned downstream for up to 20% less heat at the floorboards / foot pegs and 50% less heat at the collector, to optimize rider comfort over the stock system
  • All while producing an even deeper full-throated rumble, all with no compromise to the styling of any Vance & Hines exhaust system
  • Note: For optional stainless heat shield set see 97492 Brushed or 974973 Black ceramic coated
  • Tech-Tip: Pre-2021 USA mufflers on a 2021-up EU Softail/Touring?
  • 21-up US models, have just 2 O2 sensors in the headers
  • 21-up EU models (Euro 5 system) have total 3 or 4 O2 sensors, also 1 or 2 downstream in the muffler(s) or in the balance pipe of the cross-over section
  • Therefore 21-23 US exhaust systems will not fit 21-23 EU models
  • The FuelPak FP4 (part number 942227) allows you to disable the 2nd. downstream O2 sensor, without triggering trouble codes

Fits: 17-24 114" FLT/Touring (excl. 17-24 FLHRXS, FLHXS, FLTRXS, FLHXSE, FLTRXSE; 2023 FLTRXS; all 23-24 CVO's; models with stretched saddlebags; all trikes). Requires disabling 2nd, down stream O2 sensor (s) of 20-up EU models (NU)