Elektronikboks Axel Joost Elektronik Brain Box H
Elektronikboks til forenklet ledningsføring fra Axel Joost Elektronik
Læs mere
- Mål: 40 mm x 12,5 mm x 25 mm
- Indgangsspænding: 7–16 Volt
- Hus i polycarbonat, vandtæt støbt med epoxyharpiks
- Tilslutninger: Styreenhed 0,5 mm², forbrugere 1 mm², med 10 cm lange kabler
- Maks. strøm fra 12V-tilslutning: 15 A, maks. udgang 5 A pr. udgang og 3 A til signalhorn
- Maks. omgivelsestemperatur: 100 °C
- Belysningen dæmpes ved start
- Grå kabel tilføjet i 2025 som udgang til blinklys-LED i speedometer (til speedometre med en fælles LED)
Kompatibel med miniaturetrykknapper og kan fastgøres med burbånd på stelrør. Tydelige installationsvejledninger medfølger. Tilslutning af startmotor direkte til boksen forårsager skader – H-D-startmotor kræver 10 A for at koble ind og har brug for et ekstra lille bilrelæ mellem elektronikboksens startudgang og startsolenoide.
| Produkt-typ | Wiring misc |
| Kategori | , user 1 mm² |
Axel Joost Elektronik, brain box H
- Basic brain box; Input voltage: 7
- 16 Volt; Connections: Control unit 0,5mm², user 1 mm², with 10 cm long wires; Max Amp. from 12V connection: 15 Amp.; Dimensions: 40 mm x 12.5 mm x 25 mm
- When building a bike, or fully replacing the electrical wiring of an existing motorcycle, a brain box is a good option for a simple, solid and dependable wiring system
- Lights are dimmed at starting
- The brain boxes with handlebar wiring adapters simplify wiring and make it almost invisible when compared with some other brain boxes on the market
- Housing is polycarbonate, waterproof cast with epoxy resin
- Max. ambient temperature is 100 degree Celsius and maximum output is 5 Amp. per exit and 3 Amp. for horn
- Compatible with miniature pushbutton control knobs that function with super thin wiring
- Brain boxes can easily be tie-wrap clamped to frame tubes or similar
- All come complete with super clear installation instructions
- Note: Connecting starter motor directly on brain box will cause damage
- The H-D starter motor takes 10Amp for the solenoid to switch and requires an additional small automotive relay between starter output of the brain box and the starter solenoid
- Note: Added in 2025 is a gray cable
- This is an output for the turn signal LED in the speedo
- You can use this output if your speedo has only one LED for both directions