Cylindersæt S&S 124" Hot Set-Up sølv Dyna 06-17/Touring 07-16
S&S 124" Hot set-up kit med topstykker, sølv
Læs mere
- Opgraderer original 96" eller 103" motor til 124" kapacitet
- Finish i sølv aluminium
- Leveres komplet med stroker-svinghjul, big bore-cylindre og fladt stempelsæt
- Inkluderer 91cc high flow-topstykker, som giver 10.8:1 i kompressionsforhold
- 640 Easy Start tandhjulsdrevne knastaksler giver god vejrtrækning og enkel start med original startmotor og batteri
- Maskinbearbejdet, så den er kompatibel med indsugning i original længde
- Øger motorens totalhøjde med .096"
Original motorblok skal maskinbearbejdes for at passe til 4-1/8" big bore-cylindre. Ikke kompatibel med original tænding eller original gashåndtagshus, kræver højtydende ECU og større gashåndtagshus (som S&S 58 mm enkeltspjældshus 558678), alternativt karburator som S&S Super G og tændingssystem med justerbar tændingskurve. S&S anbefaler JIMS krumtaphus-lejeindsats (MCS 978519) og Timken-leje (MCS 508960) til 03–17 Twin Cam-modeller, monteret med JIMS værktøj (MCS 978517).
Passer til: Dyna 06-17
124" Twin Cam Hot set-up kit with heads. Silver
- With a silver aluminum finish
- Will upgrade your stock 96" or 103" engine to 124" capacity
- Kit comes complete with stroker flywheels, big bore cylinder & flat-top piston kit that gives a 10.8:1 CR with the included 91cc high flow heads
- The 640 Easy Start gear driven cams provide the lift required to let this engine breathe but insures easy turn-over with stock starter & battery
- Note 1: Stock cases must be machined to accept the larger 4-1/8" big bore cylinders
- Kit adds .096" to engine height
- Note 2: You will build a serious high performance engine
- It is therefore not compatible with stock ignition and stock (too small) throttle housings
- A large throttle housing, as the 558678 S&S 58mm single bore unit, and high performance ECU is required
- Carbureted engines will require a ignition system with adjustable advance curves and large carburetor, as the S&S Super G or similar
- Kits are machined to be compatible with stock length manifolds
- Note 3: S&S recommends MCS 978519 JIMS crankcase bearing insert, for 03-17 Twin Cam models, to replace the stock roller bearing for the stronger early style Timken bearing
- See MCS 978517 for required JIMS tool
- The correct Timken bearing can be ordered as MCS 508960 / OEM 9028
Fits: 06-17 Dyna; 07-16 FLT/Touring (Excl. Twin-Cooled models) (NU)