Cylindersæt S&S 124" Hot Set-Up sort Softail 07-17

55 655,4 DKK

S&S Hot Set-Up Kit 124" med topstykker
Læs mere

565149 S&S
  • Opgraderer original 96" eller 103" motor til 124" kapacitet
  • Sort krympelakeret finish med bearbejdede finner
  • Inkluderer stroker-svinghjul, Big Bore-cylindre og stempelsæt med fladt stempelhoved
  • 91cc High Flow-topstykker, der giver et kompressionsforhold på 10.8:1
  • Tandhjulsdrevne 640 Easy Start-knastaksler, der muliggør start med original startmotor og batteri
  • Øger motorens samlede højde med 0.096"
  • Bearbejdet, så det er kompatibelt med indsugningsrør i original længde

Original krumtaphus skal bearbejdes, så det passer til de større 4-1/8"-cylindre. Ikke kompatibel med original tænding eller original gashåndtagshus, kræver højtydende ECU og større gashåndtagshus (som S&S 58 mm 558678), alternativt karburator som S&S Super G og tændingssystem med justerbar tændingskurve. S&S anbefaler MCS 978519 JIMS krumtapshusindsats til 03-17 Twin Cam til konvertering til Timken-leje (MCS 508960, værktøj MCS 978517).

Passer til: Softail 07-17

124" Twin Cam Softail hot set-up kit with heads. Black

  • Black wrinkle painted with highlighted fins
  • Will upgrade your stock 96" or 103" engine to 124" capacity
  • Kit comes complete with stroker flywheels, big bore cylinder & flat-top piston kit that gives a 10.8:1 CR with the included 91cc high flow heads
  • The 640 Easy Start gear driven cams provide the lift required to let this engine breathe but insures easy turn-over with stock starter & battery
  • Note 1: Stock cases must be machined to accept the larger 4-1/8" big bore cylinders
  • Kit adds .096" to engine height
  • Note 2: You will build a serious high performance engine
  • It is therefore not compatible with stock ignition and stock (too small) throttle housings
  • A large throttle housing, as the 558678 S&S 58mm single bore unit, and high performance ECU is required
  • Carbureted engines will require a ignition system with adjustable advance curves and large carburetor, as the S&S Super G or similar
  • Kits are machined to be compatible with stock length manifolds
  • Note 3: S&S recommends MCS 978519 JIMS crankcase bearing insert, for 03-17 Twin Cam models, to replace the stock roller bearing for the stronger early style Timken bearing
  • See MCS 978517 for required JIMS tool
  • The correct Timken bearing can be ordered as MCS 508960 / OEM 9028

Fits: 07-17 Softail (NU)