CANsmart™ Controller GEN II V-Twin
Styreenhed Denali CANsmart Controller GEN II
Læs mere
- Uafhængig styring og dæmpning (10 %–100 %) af to sæt lamper direkte via original triptællerknap
- Synkroniser ekstralys mellem programmerbare høj/lav-indstillinger med original fjernlysknap
- Modulerende lys og Flash to Pass-funktion via fjernlysknappen for øget synlighed
- Sluk eller blink med ekstralys sammen med blinklys
- Stroboskopfunktion til ekstralys når hornet bruges, fungerer med original eller SoundBomb
- Plug & play-installation til eftermarkedshorn uden ekstra ledningsføring eller relæ
- Smart bremseteknik aktiverer ekstra bremselys ved deceleration i realtid før opbremsning
- Styret 12V-strømkilde til tilbehør (f.eks. GPS, telefon eller opvarmet tøj) med op til 30 sekunders forsinket slukning
Passer til: H-D 11-
CANsmart Controller GEN II V-Twin
- The CANsmart Controller offers a range of advanced lighting features to help you get noticed on the road.
- The Modulate Lights setting allows you to set your passing lamps or auxiliary lights to modulate, increasing your visibility to other motorists.
- The Flash to Pass feature lets you grab someone's attention by pulsing your high beam switch three times, causing your auxiliary lights to strobe three times fast.
- High/Low Sync - Set passing lamps and auxiliary lights to switch between a programmable high/low setting with the factory high beam switch.
- ON/OFF and Dim - Independently control two sets of lights ON/OFF and change intensity level (for both day and night) right from your bikes factory trip switch. Click three times to turn lights on/off, or hold for 3 seconds to enter dimming mode where you can cycle between 10% - 100% intensity.
- Modulate Lights - Set passing lamps or auxiliary lights to modulate to increase your visibility to other motorists.
- Flash to Pass - Need to get someone's attention? Pulse your high beam switch three times and your auxiliary lights will strobe three times fast.
- Cancel With Turn Signal - This feature cancels the corresponding auxiliary light when you turn your turn signal on preventing powerful auxiliary lights from overpowering your signal.
- Flash With Turn Signal - This features flashes the corresponding auxiliary light when you turn your turn signal on, enabling auxiliary lights to function as turn signals.
- Plug & Play Horn Installation - Quickly and easily connect high power aftermarket horns like our SoundBomb without having to add an additional harness or relay.
- Strobe with Horn - With this feature selected the CANsmart software will automatically strobe your passing lamps or auxiliary lights when you sound your horn. This feature works whether you have the factory horn or SoundBomb horn installed.
- Deceleration Activated "Smart Brake" Technology - The CANsmart reads vehicle speed in real time to activate your auxiliary brake light during deceleration before you even touch the brake. You can adjust the sensitivity and minimum speed at which the Smart Brake Feature will activate.
- Switched Power Source - The CANsmart provides a universal "accessory" option which simply gives you clean switched 12V power. That means whatever accessory you connect to this circuit will turn on and off with your ignition.
- Delay Time Out - You can also set the accessories on this circuit to have a delayed time out. This will keep them powered for up to 30 seconds after your turn off your bike.
- On Board Power - The "accessory" circuit option is ideal for powering your GPS, phone, heated gear or any other electronic device.