Dialdim Lighting Controller

2 953,2 DKK

Denali DialDim - styreenhed til to lyskredse med dimmerring
Læs mere

20500538
  • Styrer til/fra og lysstyrke for to uafhængige lyskredse med én og samme drejeknap
  • Blå ring styrer lyskreds 1, grøn ring styrer lyskreds 2 - dobbeltklik skifter mellem kredsene
  • Otte lysstyrkeniveauer pr. kreds (5%, 15%, 30%, 45%, 60%, 75%, 100%)
  • Elektronisk sikrede kredse med otte sikringsværdier (1A, 2A, 4A, 6A, 8A, 10A, 15A, 20A), indstilles direkte på drejeknappen - rød ring ved udløst sikring
  • Viser batterispænding ved start: grønt blink ved sund batterispænding, rødt blink under 11,8V
  • Automatisk frakobling ved lav batterispænding (under 10,8V) med fire røde blink som advarsel
  • Maks. 20A pr. kreds, 30A samlet, 12 VDC driftsspænding

Funktionerne High/Low Sync, Stealth Mode, afbrydelse ved blinklys, blink synkroniseret med blinklys samt strobe ved horn aktiveres ved at tilslutte switchens indgangskabler (blå, gul, orange, grøn) til køretøjets fjernlys-, blinklys- henholdsvis hornkreds. For at aktivere fjernlys-, blinklys- og hornrelaterede funktioner kræves tilslutning til en ren 12V-kreds i køretøjet, funktionen deaktiveres automatisk, hvis den tilsvarende kreds ikke tilsluttes.

Passer til: Ducati Rally / DESERT X 950 ABS 23-24

Dialdim Lighting Controller

  • ON/OFF & Dim - Independently control two sets of lights on/off and intensity level using the single DialDim Switch. The blue halo controls light set one and the green halo controls light set two. Double click to switch between the two circuits.
  • High/Low Sync - Your auxiliary lights will automatically switch between your selected dim setting to full intensity with the factory high beam switch. Simply connect the blue input wire to your vehicle's high beam circuit to enable this feature.
  • Stealth Mode - A clever 0% dim setting on the switch allows your lights to be "off" during normal driving conditions but will jump to 100% intensity with your vehicle's high beam switch. The lights will also react to turn signal and horn inputs in this mode but will remain off when no inputs are detected.
  • Cancel with Turn Signal - When enabled the main lights (blue circuit 1) will cancel in sync with your signal to prevent "washing out" your factory turn signal. Simply connect the yellow and orange input wires to your vehicle turn signal circuit to enable this feature.
  • Flash as Turn Signal - When enabled your amber visibility lights (green circuit 2) will flash in sync with your factory turn signals. Simply connect the yellow and orange input wires to your vehicle turn signal circuit to enable this feature.
  • Strobe with Horn - When enabled your auxiliary lights on both circuits will strobe at 4Hz when you sound your horn. Simply connect the green input wire to your vehicle horn circuit to enable this feature.
  • Electronically Fused Circuits - Both light circuits are electronically fused and can be set right from the switch itself! The halo will illuminate red to notify you when a circuit fused is tripped.
  • Voltage Display Indicator - Upon vehicle startup, the switch halo will flash green to indicate a healthy battery voltage, or flash red to indicate a battery voltage that is below 11.8v.
  • Low Voltage Cutoff - If the battery voltage drops below 10.8v the lights will not power on preventing you from being stranded. The switch halo will flash 4 red LEDs to indicate the low voltage condition.
  • To enable high-beam, turn signal, and horn related functions you need to connect to a clean 12v circuit on your vehicle. To disable these features simply do not connect to the corresponding vehicle circuit.
  • Two fully independent light circuits
  • Eight intensity levels per circuit (5%, 15%, 30%, 45%, 60%, 75%, 100%)
  • Eight electronic fuse values (1A, 2A, 4A, 6A, 8A, 10A, 15A, 20A)
  • Five feature input wires (ignition, high beam, horn, left turn, right turn)
  • 20A max per circuit (30A max combined)
  • Operating Voltage: 12 VDC

Lignende produkter

Cansmart Gen II Cansmart Gen II
Cansmart Gen II
20500527
2 953,2 DKK
Cansmart Gen II Cansmart Gen II
Cansmart Gen II
20500528
2 953,2 DKK
Cansmart Gen II Cansmart Gen II
Cansmart Gen II
20500530
2 953,2 DKK
Strömbrytare Denali CANsmart Dryseal Ktm 13-24 Strömbrytare Denali CANsmart Dryseal Ktm 13-24
Cansmart Gen II Cansmart Gen II
Cansmart Gen II
20500533
2 953,2 DKK