Signalhorn Denali Electromagnetic Tone
Kompakt elektromagnetisk signalhorn med dyb tone fra Denali
Læs mere
- Lydstyrke på 113 decibel ved 3 feet, hvilket er dobbelt så højt som et almindeligt 100-decibel signalhorn af skivetype
- Direkte plug & play-opgradering til originalhorn med fladstikkontakter og kapacitet til 5 ampere
- Driftsspænding: 12 volt (mindst 11.7 volt kræves)
- Strømforbrug: 5 ampere
- Mål: cirka 3.25" x 3.4" x 2.5"
- Stilfuldt helsort design i ét stykke
- Passer til de fleste originale placeringer for signalhorn
- Ikke kompatibel med KTM 1190 og 1290
Hvis originalkontakten ikke er af fladstiktypen, skal den udskiftes med fladstikhylser (hun). Til kredsløb, der ikke kan klare 5 ampere, kan et separat ledningsnet og relæ bruges til at tage strøm direkte fra batteriet. Til BMW kræves kabeladapter DNL.WHS.10100, CANsmart-controller eller relæledningsnet til installation (sælges separat).
Mini Electromagnetic Low Tone Horn
- At 113 decibels, the distinct low-tone sound from the DENALI SoundBomb Mini Motorcycle Horn is twice as loud as a typical 100 decibel disc horn.
- Designed to be a direct Plug & Play upgrade from your factory horn, requiring no additional relay or wiring harness as long as the original horn has blade-style electrical connections and can handle the 5 amp load.
- When stock isn't quite enough, be heard with the SoundBomb Mini.
- Some motorcycles horn circuits are not capable of powering this 5 amp horn.
- If your horn circuits' max amperage is less than 5 amps, or if you are unsure, simply add our plug-n-play harness to bypass the horn circuit and draw power directly from your battery.
- Also, add our standard relay as this is not included with the horn harnesses.
- 113 Decibels at 3 feet
- Operating voltage:12 Volts (11.7volts required)
- Power draw: 5 Amps
- Single piece design
- Dimensions: Approximately 3.25" x 3.4" x 2.5"
- Stylish all black design
- Fits in most factory horn locations
- If the original horn does not have blade-style electrical connections, the original horn connector needs to be removed and replaced with female spade connectors in order to connect to the Soundbomb Mini.
- This horn is not compatible with KTM 1190 & 1290 Motorcycles.
- If you are not using the BMW wiring adapter (DNL.WHS.10100), a CANsmart controller or plug-n-play relay harness are required for installation (sold separately)
- DISCLAIMER - Add our BMW wiring adapter (DNL.WHS.10100) for plug & play installation to BMW motorcycles.