Knastakselsæt Feuling Hp Water Cooled 1/2 114" M8 '17-'24

20 672,4 DKK

Feuling HP+ knastakselsæt med Reaper 472-knastaksel
Læs mere

09251329 Feuling
  • Sættet indeholder HP+ High Volume oliepumpe, High Flow billet knastplade og Reaper 472-knastaksel
  • Inkluderer også hydrauliske rulleløftere, faste stødstænger i ét stykke (.165" væg), Timken/Koyo knastleje og pakninger
  • ARP-befæstelse til knast/krumtap, tapbolte og møtrikker til vippearme, skiver, O-ringe, molyfedt og Loctite medfølger
  • Øger olietrykket, returvolumen og motorens oliestrøm samt eliminerer wet sumping
  • Giver 30 % mere trykvolumen og 53 % mere returvolumen end original på M-Eight Twin-Cooled
  • 68 % mere oliemængde til krumtap og plejlstangsleje samt sænker olieniveauet i sumpen med 50 %
  • Sænker motortemperaturen med 15–25° og olietemperaturen med 15–30°
  • Fremstillet i USA

Passer til Milwaukee-Eight Twin-Cooled (væskekølede) motorer, men passer ikke til 2023–2024-modeller med 121" VVT-motorer. Forstærkede ventilfjedre er ikke påkrævet, men anbefales for en mere støjsvag og blødere ventilstyring (se Feuling #1107 eller #1108).

Passer til: M8 '17-'24

Produkt-typ Camchest Kit
Tillverkarens Art. Nr. 7257

HP+ Camchest Kit

  • Quieter and smoother engine operation
  • Increases oil pressure, scavenge volume and engine oil flow
  • Eliminates wet sumping, blowby and oily air cleaners
  • Heavy-duty .165” wall one-piece pushrod reduces valvetrain harmonics and increase valve lift
  • Kit includes: Feuling High Volume oil pump, High Flow billet camplate, Reaper series camshaft, hydraulic roller lifters, fixed length pushrods, Timken/ Koyo cam bearing, rocker arm studs and nuts, gaskets, O-rings, ARP cam/ crank fasteners, washers, moly lube and Loctite
  • 30% more pressure gear volume over stock for M-Eight Twin-Cooled motors
  • 53% more scavenge gear volume over stock for M-Eight Twin-Cooled motors
  • 27% more pressure and scavenge gear volume over stock for M-Eight Oil-Cooled motors
  • 42% more scavenge volume with port sizing, matched passages and holes to the engine case for M-Eight Twin-Cooled motors and M-Eight Oil-Cooled motors
  • 68% more oil volume to the crankshaft and connecting rod bearing for M-Eight Twin-Cooled motors and M-Eight Oil-Cooled motors
  • Feuling test results show a 50% reduction of engine sump oil level
  • 15-25° cooler engine temperatures for M-Eight Twin-Cooled motors and M-Eight Oil-Cooled motors
  • 15-30° cooler oil temperatures for M-Eight Twin-Cooled motors and M-Eight Oil-Cooled motors
  • 10-30 more psi of oil pressure for M-Eight Twin-Cooled motors and M-Eight Oil-Cooled motors
  • Made in the USA
  • Not for '23-'24 models with 121" VVT motors.
  • Hp+ Camchest Kit, Center/Water Cooled M8
  • FEULING M8 CENTER/WATER COOLED (Twin Cooled) camchest kits include all necessary components from top to bottom of the camchest conveniently packaged under 1 part #
  • These combination kits not only ensure each individual part is designed to work and function together but to do so in total harmony
  • These camchest kits take the guess work out of the ordering process and guarantees the engine builder maximum reliability, peak performance and the coolest engine and oil temperatures obtainable
  • Available in HP+ or RACE SERIES kits
  • Magnets in oil pump to help protect gears and pressure relief valve
  • Test results show 2 HP gain and 2 ft/lbs of TQ gain to the rear wheel on Milwaukee Eight
  • The 472 Reaper is a great all-around camshaft and Feuling’s go to for 4 1/2 stroke 114"
  • 117" looking for a little more than our 465 grind and wanting a bolt-in
  • The 472 has a great bottom end with substantial gains above 2,900 RPM when compared to stock
  • Responds very well to increased bore and or compression, exhaust system and air cleaner
  • Use of performance valve-springs is not required but may result in a quieter, smoother running valve-train See Feuling #1107 or #1108
  • Cam Part # 1350 Valve Lift Open Close Duration @ 50" lift @ TDC Lobe Centerline Intake .468 8 BTDC 25 ABDC 213 .117 98.5 Exhaust .472 50.7 BBDC 7.75 ATDC 238 .110 111.5 RPM range: 1,900
  • 5,900 Grind: 472 Overlap: 16 Due to the mass call volume & inquires with requests for the M8 oil pump back cover O-ring/seal groove, we’ve added the groove! (5/11/21)
  • Although Feulings in house testing on healthy engines did not show a benefit
  • The O-ring may have potential benefits in certain circumstances such as engines with higher cylinder leak down, poor subseal O-ring seal, raised sump hole & or sump plug (see M8 PRO TIP below) & looser lifter to lifter bore clearances
  • OIL LEVEL NOTE
  • DO NOT OVERFILL OIL TANK It is important to get the correct hot oil level in your bike
  • Feuling recommends running the oil level 90%-99% full when hot
  • Note: The M8 oil pick up port is on the right side of the engine
  • Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank
  • We recommend the following steps to achieve proper oil level: 1
  • Check cold oil level
  • Ride the bike until operating temperature is reached
  • 3
  • Shut the bike off while still in the upright position. (This insures an accurate reading) 4
  • Add or remove oil as needed
  • HP+ camchest kit Fits: M8 water Cooled Engines Feuling dOEs not recommend tuning beyond stock emissions standards
  • Note: Special Order Product only
  • To order please contact your MCS sales representative

Includes: • HP+ High Volume Oil Pump • High Flow Billet Camplate • HP+ Hydraulic Roller Lifters • Cam Installation Kit • Reaper 472 Series Camshaft • One Piece Pushrods • Timken/Koyo Cam Bearing • Rocker Arm Studs and Nuts • ARP Cam/Crank Fasteners • Washers • Moly Lube • Loctite

Fits: M8 '17-'24 (Except VVT) center/water cooled, Chain Drive, Includes 472 Reaper Camshafts #1350, Cam Install kit #2030, HP+ Lifters #4000, one piece pushrods #4087, HP+ oil pump #7019, HIGH FLOW camplate #8017, and ARP Rocker studs and nuts, Camplate/Oil Pump Fasteners.