Knastaksel Feuling Reaper 594 Twin Cam 99-06
Feuling Reaper 594 konverteringsknastaksel
Læs mere
- Kraftfuld knastaksel til både store motorer og højttrækkende mindre motorer
- Arbejdsområde 2200–6250 RPM (103", 110" og 124") og 2500–6800 RPM (95")
- Konverterer tidlige Twin Cam med mekanisk kædestrammer til hydraulisk kædestrammer
- Har 99–06 indre knastakseltapper og 07–16 ydre tapper
- Muliggør brug af 07–17 knastplade, oliepumpe og hydrauliske knastkædestrammere
- Kræver højtydende ventilfjedre, stødstænger, ventilløftere, modificeret karburator/drosselhus, udstødning, indsugning og kobling
- Optimeret til øget kompressionsforhold og kræver mapping/justering
- Fremstillet i USA
Bruges til at konvertere 99–06 Twin Cam til 06–17 hydraulisk strammersystem. Kræver 07–17 knastplade og oliepumpe (passer ikke i en konverteringsknastplade), samt knastkæde, hydrauliske kædestrammere, ydre knast- og krumtapakselstandhjul og shims/spacers, som sælges separat. 99–01 med Magneti Marelli-tænding kræver Andrews-knasttandhjul med tændingstrigger til montering af den nye ydre knastkæde.
Passer til: Twin Cam 99-06
OEM-nr.: 25675-06, 25683-06, 25673-06, 25728-06, 39968-06, 39969-06, 25729-06, 25731-06, 25734-06, 25736-06
| Produkt-typ | Camshaft |
| Tillverkarens Art. Nr. | 1019 |
Reaper 594 Cam
- Fierce performing camshaft for an array of engine sizes, large displacement 103", 110" and 124" engines looking for a superior torque band with excellent horsepower gains in heavy bikes (2200-6250 rpm)
- Smaller high-revving displacement 95" style engines in lighter bikes looking to twist the throttle and tap into some horsepower (2500-6800 RPM)
- Large displacements respond well to increased compression ratio and smaller displacements will require it
- 594 cams require high-performance valve springs, pushrods, lifters, carburetor or throttle body work, performance exhaust, intake and clutch
- Made in the USA
- Used to convert 99-06 Twin Cams, with the stock mechanical spring adjusted chain tensioners, to 06-17 style hydraulic chain tensioners that work on engine oil pressure
- This 06-17 hydraulic system is better and used in all late model Twin Cams
- Higher compression ratios improve performance further
- Tuning required
- Fitment notes:
- Additional parts are required
- See 'Additional parts required for installation' below
- These are not available through Motorcycle Storehouse, unless the MCS part number is mentioned
- Required components for 99-06 to 06-17 conversion camshaft kits: Feuling, OE+ hydraulic cam chain tensioner conversion kit 707402 99-00 Twin Cam; 2001 FLT or 707403 01-06 Twin Cam (excl
- 2001 FLT; 2006 Dyna)
- Therefore also requires following parts: 707246 Outer chain
- Repl
- 25675-06
- 707245 Inner chain
- 25683-06
- 25673-06
- 948489 Outer hydraulic tensioner unit
- 39968-06
- 39969-06
- Feuling spacer kit Kit included one thrust washer and one of each size cam alignment spacers
- Use as required Note: Installation requires qty
- Note: Correct spacer thickness is a must for proper sprocket alignment
- 707244 17-25 M8 (excl
- 503707 99-01 TCA/B
- Andrews with ignition trigger ring
'99-'06 Twin Cam engines utilize the '99-'06 inner cam journals with the '07-'16 outer cam journals allowing the use of the '07-'16 camplates, oil pump, hydraulic chain tensioners and chain drive system. Conversion camshafts do not fit in a conversion camplate, conversion camshafts use the '07-'17 camplate/oil pump. '99-'01 engines with Magneti Marelli ignition requires use of Andrews sprocket in replacement of HD 34 tooth sprocket #25728-06 in order to install the new style outer cam chain. Recommended to use with Feuling oiling stsytem. Required factory hydraulic tensioners, outer cam & crank sprockets and thrust washers (sold separately).
Fits: 99-06 Twin Cam (excl. 2006 Dyna) (NU)