Knastaksel Feuling Reaper 508 Softail 18-26

7 524,45 DKK
Laveste pris de seneste 30 dage: 4 429,8 DKK

Feuling Reaper Race Series 508 knastakselsæt med kædedrift
Læs mere

09290084 Feuling
  • Knastaksel med kædedrift og aggressiv karakter
  • Sættet indeholder 993526-knastaksel, Race Series hydrauliske løftere og monteringssæt
  • Monteringssættet indeholder knastaksellejer, hardware til knast-/krumtapaksel samt paknings- og O-ringssæt
  • Race Series-løftere med 0,200" slaglængde og langsommere bleed down-hastighed
  • Omdrejningsområde: 2 250–5 900 rpm
  • Løft: indsug .508", udstødning .511"
  • Duration ved 0,050" løft: indsug 231°, udstødning 243°

Ventilfjedre til højt løft kræves på originale topstykker (se Feuling Beehive 993530 eller 588021). En udstødning og et luftfilter med højt flow anbefales kraftigt. Feuling anbefaler også stødstængerne 993528 og boltsættet 707450.

Passer til: Softail 18-26

Produkt-typ Lifter
Tillverkarens Art. Nr. 1459
Laveste pris de seneste 30 dage: 4 429,8 DKK

Reaper Race Series 508 cam kit

  • Chain drive
  • This Feuling M8 camshaft kit includes chain drive camshaft, Race Series lifters and a cam installation kit that includes cam bearing, cam/crank hardware and a gasket/O-ring kit that allows for install of the factory one-piece pushrods
  • Feuling recommends the optional 993528 Feuling one-piece heavy duty HP+ pushrod kit, with 0.165" wall thickness
  • Feuling rocker box fastener kit 707450 is also highly recommend to help prevent cylinder head cracking, this kit replaces the rocker shaft bolts with studs and nuts to help reduce the stress on the rocker shaft standoffs
  • HP+ kits come with HP+ lifters and RACE SERIES kits come with RACE SERIES lifters 508 CAM - 'The Grim Reaper' Aggressive pulling power with a "nasty" sound
  • This camshaft revs up faster than the 521 grind, sounds nastier and pulls harder but is more difficult to tune
  • The REAPER 508 grind will shine in 114" and larger cubic inch engines with added compression ratio
  • Ported cylinder heads are not required but will complement the cam and add even more pulling power throughout the range
  • The stock throttle body produces an excellent powerband and use of a high flow throttle body will increase peak power numbers
  • A high flow exhaust system and air cleaner is highly recommended for optimal performance
  • NOTE: High Lift valve springs are required on stock cylinder heads, see FEULING BEEHIVE valve spring kit 993530 or 588021
  • Kit includes 993526 camshaft only
  • RPM range 2,250
  • 5,900
  • Grind: 508 Valve Lift Open Close Duration @ 50" lift @ TDC Lobe Centerline Intake .508 21.5 BTDC 36 ABDC 231 .180 97.5 Exhaust .511 45 BBDC 9 ATDC 243 .146 104.25 Overlap: 30.5
  • RACE SERIES hydraulic lifters have a full .200" of total travel designed with a slower bleed down rate to handle heavy valve spring pressures, increase engine RPM before valve float and feature increased roller clearance for steep ramped camshafts and clearance for the M8 front exhaust camshaft lobe flange. *Cam specs measured on the lifter @ 0.050" lift with 1.61 rocker arm ratio
  • LIFTERS 508 RAC CH DRV M8 | LIFTERS 508 RAC CH DRV M8

Fits: 18-26 Softail; 17-26 FLT/Touring (excl. 23-26 VVT); 17-26 Trikes


Lignende produkter

Lyftare Feuling Parts Cuffs H-D 17-upp
Feuling Løfterstyr Feuling Cuffs H-D 17-
09290094
483 DKK
Feuling, Race Series tappet set. Short travel. +.015" OD 707360k-0d36c6ab
Feuling, Race Series løftersæt. Short travel. +.001" OD 707359k-cf142638
Feuling, Race Series tappet set. Short travel. STD OD 707358k-c1264806
Feuling, Race Series tappet set. STD travel. +.001" OD 707356k-300bf5eb
Feuling, Race Series tappet set. STD travel. STD OD 707355k-14acd715