Oliesystem Feuling 0.115 0.200 Twin Cam 99-06

13 220,4 DKK

Feuling Race Series komplet opgraderingskit til oliesystem
Læs mere

09320292 Feuling
  • Indeholder Race Series oliepumpe, rød anodiseret knastplade, Race Series ventilløftere, pakningssæt, lejelåseplade og monteringsdele
  • Oliepumpe i hårdanodiseret billet 7075-aluminium, som er 50 % hårdere og stærkere end den originale pumpe
  • Øger olietryk, returvolumen og oliestrøm til ventilløftere, stempelkølingsdyser, krumtapaksel og plejlstangslejer
  • Giver 15–30 lbs højere olietryk samt 25°–35° lavere motortemperatur og 15°–30° lavere olietemperatur
  • Modvirker wet sumping, krumtaphusventilation i luftfilteret og blow-by
  • Testresultater viser en forøgelse på 3 hk og 4 ft./lb. i drejningsmoment på baghjulet
  • Konverteringsknastplade med knastlejesæder af 99–06 Twin Cam-typen til indpressede lejer
  • Knastpladen er konstrueret til at bruge det nyere 07–17-system med kædespænder sammen med knastaksler af 99–06-typen

Bruges med short-travel stødstænger art.nr. 0928-0116 på knastaksler med standard grundcirkel (Feuling 525, 543 og 574) eller art.nr. 0928-0117 på knastaksler med lille grundcirkel (Feuling 594 og 630). Konverteringsknastplader kræver knastaksler af 99–06-typen; kædespændere, kæder, kædehjul og afstandsstykker købes separat.

Passer til: Twin Cam 99-06

Race Series Oil System Pack

  • Combine all the needed components to finish your engine's oiling system
  • Quieter and smoother engine operation
  • Increase oil pressure, scavenge volume and engine oil flow
  • 25°-35° cooler engine temperatures
  • 15°-30° degree cooler oil temperatures
  • 15-30 lbs more psi of oil pressure
  • Eliminate wet sumping, blowby and oily air cleaners
  • Test results show 3 horsepower gain and 4 ft./lb. of torque gain to the rear wheel
  • Billet 7075 aluminum oil pump is 50% harder and stronger than the factory pump; holds tighter tolerances under temperature
  • Race Series full-travel hydraulic lifters have a full .200” of total travel designed with a slower bleed-down rate to handle very heavy valve spring pressures, increase engine rpm before valve float and have increased roller clearance for steep ramped camshafts
  • Race Series short-travel hydraulic lifters have .115” of total travel and will increase rpm by decreasing valve float and valve-train harmonics while maintaining a quiet engine
  • Travel reduction reduces the amount of oil that is required to fill the inside of the lifter which reduces oil aeration inside the lifter on steep, fast action high lift camshaft lobes
  • Includes bearing retainer plate and hardware.
  • Kit include all to give your bottom end a fresh start
  • Oil pump, cam plate, lifter assembly / tappet assembly and gasket set
  • Great upgrade and a perfect base when installing a set of performance cams
  • Oil is the Life Blood of your Engine!
  • FEULING increases oil flow and volume by enlarging the oil pump reservoirs and critical oil passages including matching the oil port holes throughout the cam plate to the port holes in the engine case which increases engine oil flow to the lifters, piston cooling jets, crankshaft and rod bearings. -RACE SERIES ST Kits include a billet 7075 hard anodized oil pump which is 50% harder and stronger than the factory pump holding tighter tolerances under temperature
  • Includes 566126, 707364, 707384, 566082
  • Note: Special Order Product only
  • To order please contact your MCS sales representative

Use with short-travel pushrods PART #0928-0116 on stock base circle camshafts (Feuling 525, 543 and 574 grinds) and PART #0928-0117 on small base circle camshafts (Feuling 594 and 630 grinds). Conversion camplates use '99-'06 style camshafts; oil system pack requires separate purchase of hydraulic chain drive tensioners, chains, sprockets and spacers. Includes Race Series lifters, Race Series oil pump and red anodized camplate. Conversion camplate system uses the original style ’99 -’06 Twin Cam cam bearing bores for use with the press in bearings. Camplate is designed to use the new style ’07-’17 hydraulic chain tensioner system with the original ’99 -’06 Twin Cam style camshafts.

Fits: 99-06 Twin Cam (excl. 2006 Dyna). When converting to 06-17 hydraulic chain tensioners (NU)


Lignende produkter

Oliesystem Feuling HP Twin Cam Softail 07-17 566086k-0b0b488e
Oliesystem Feuling HP Twin Cam A/B 99-06 7070 566083k-465c80b5
Oliesystem Feuling Gear .200" Twin Cam 99-06 707390k-6c371d0a
Oliepumpe Feuling Softail 07-17 707384k-951f6b4d
Feuling Oliepumpe Feuling Softail 07-17
09320026
5 513,1 DKK
Oliesystem Feuling HP Twin Cam A/B 99-06 7071 566084k-3578e4d6