Stempelringe Hastings 3-5/8" krom Shovel 3-5/8" big bore
Stempelringssæt i krom/moly til 3-5/8" cylinderboring, standard
Læs mere
- Materiale: krom/moly
- Passer til 3-5/8" big bore-stempler med .078" (2,0mm) kompressionsringe og 3/16" (.186") (4,75mm) olieringe
- Standard cylinderboring: 3,625" (92,075mm)
- 1. ring: 2,0mm
- Olieringe af typen low tension, 3-delt flex vent (i de fleste tilfælde)
Ved brug af 3-5/8" S&S-stempler bør man i de fleste tilfælde i stedet vælge Hastings-ringe beregnet til S&S-stempler (mærket 'S&S 3-5/8 Big Bore'), som har 1,6mm kompressionsringe og 4,0mm olieringe – kontrollér pasform inden bestilling. Ved overstørrelse øges cylinderdiameteren med .010" (0,254mm) pr. trin.
Passer til: Shovel 3-5/8" big bore
| Kategori | Piston rings |
| Produkt-typ | Piston rings |
3-5/8" bore chr/moly piston rings. STD
- Used with 3-5/8" big bore pistons that use .078" (2.0mm) compression and 3/16" (.186") (4.75mm) oil rings
- Std cyl. bore: 3.625" (92.075mm)
- 1st ring: 2.0mm
- Note: When 3-5/8" S&S pistons are used you should, in practically all cases, use the Hastings rings for S&S pistons that are mentioned as 'S&S 3-5/8 Big Bore'
- These come with 1.6mm compression rings and 4.0mm oil rings
- Check before you order
- Tech tip: Piston grooves vs piston rings
- It's not difficult to determine if a Hastings piston ring set will fit a certain piston
- You should measure the height of the piston groove in the piston itself
- In most cases Hastings oil rings are of the low tension 3-piece flex vent type
- Ring heights are listed for reference
- For each oversize cylinder diameter will increase with .010" (0.254mm)
- The standard bore of the cylinder is listed for reference. (Tech tip information provided by Hastings Manufacturing Company, Inc.)
Fits: Shovel 3-5/8" big bore