Blinklys Kellermann R2 ECE
Kellermann R2 lastuafhængigt blinklysrelæ
Læs mere
- Lastuafhængigt blinklysrelæ, der giver korrekt og konstant blinkfrekvens
- Erstatter alle originale 2-3-polede blinklysrelæer
- Fungerer med glødepærer, halogen, LED eller en kombination heraf
- Forhindrer uønsket medblink på ikke-aktiverede blinklys
- Koblingskapacitet: 0,5–85 watt
- Beregnet til 12 V DC
- ECE-godkendt
- Alle nødvendige komponenter til montering medfølger
Anbefales ikke til brug med havariblink, og i visse tilfælde skal havariblinkfunktionen deaktiveres.
| Tillverkarens Art. Nr. | 123,97 |
Load-Independent Indicator Relay
- Flasher Relay R2: The Classic! The load-independent R2 flasher relay is the universal problem solver when using LED and halogen indicators. It replaces all original 2-3 pole flasher relays and delivers a constant and correct flashing frequency.
- Connection is simple. If following the conversion to LED indicators, the non-activated indicators also flash, then all that is required is for the relay to be connected to a left and a right indicator in order to reliably cure this problem.
- All necessary components required for installation are included.
- In certain cases the hazard warning flasher facility must be deactivated.
- Replaces the original 2-3 pole flasher relay.
- Restricts the accompanying flashing of non-activated indicators.
- Load-independent / usual flash rate.
- Switching capacity 0,5-85 watt.
- Small dimensions 34 x 22 x12 [mm] (L/W/H).
- High quality metal housing.
- Suitable for indicator switches.
- Suitable for 12 volt DC applications.
- R2 classic one turn signal flasher, ECE appr
- Housing dimensions of just 30mm long x 30mm wide x 10mm high
- Load independant and will therefore give the correct flash rate for incandescent bulbs, halogen, LED or a combination of these lights
- For 12V only
- Note: Not advised to be used with hazard lights