Tætningssæt ventilstyr Kibblewhite KPMI PTFE Evo Big Twin 84-99 (4-pak)
Kibblewhite tætningssæt til ventilstyr i PTFE
Læs mere
- Fremstillet i PTFE med tilsætningsstoffer for øget stabilitet og reduceret friktion
- Bevarer sine mekaniske egenskaber ved temperaturer op til 500° F
- Konstruktion med dobbelte fjedre giver konstant spænding mod ventilstyr og ventilskaft
- Kompatible med ventilstyr af OEM-type
- Kræver ingen bearbejdning ved montering
- Fremstillet i USA
Tætningerne er cirka 0,020” (0,50 mm) mindre end ventilskaftet og styrets top og kræver en særlig monteringsteknik. For nemmere montering over ventilskaftet anbefales monteringsbeskyttelse (artikelnr. 501823, 501824 eller 501825). Tryk ikke direkte på tætningens top ved montering på styret, men brug for eksempel en 12-punkts 12 mm dopnøgle mod tætningens krave.
Passer til: Evo Big Twin 84-99
OEM-nr.: 18001-83, 18001-83C, 18001-83B, 18001-83A
| Produkt-typ | Seal |
| Tillverkarens Art. Nr. | 71008-4 |
| Material | PTFE |
| OEM-nr | 18001-83B |
Solid PC Valve Guide Seals
- Manufactured from PTFE
- PTFE is known to retain its mecahnical properties at temperatures as high as 500° F
- Fillers have been added to keep the material stable and to reduce friction
- Twin spring design provides continous tension on the valve guide and the stem of the valve
- Made in the USA
- KPMI, int/exh. valve guide seal kit. PTFE
- Manufactured with PTFE lining
- Kibblewhite Precision Machining valve guide seals are compatible with OEM style valve guides
- No machining required
- Installation note: Valve guides made of PTFE require another fitment technique than 'regular' or non-PTFE valve guides, this is due to the PTFE material
- They are typically 0.020” (0.50mm) smaller than the valve stem and guide top they’re designed to fit
- The guide top should have a decent chamfer
- The valve stem should have a decent chamfer, but a mylar seal installation protector / installation capsule (501823 green 5/16" / 0.3125", 501824 Yellow 11/32" / 0.34375", 501825 3/8" / 0.375") is advised for easier installation over the valve stem
- You have to kind of roll the seal around the valve tip while exerting downward pressure to get it started
- Don't push directly on the very top of the seal to get it on to the guide, you’ll collapse the sealing area and tear the seal
- A 12 point 12mm socket catches the shoulder of the guide pretty well and can be used to push the seal on to the guide until it just bottoms out
- The choker wire around sealing area and the band around the area that fits the guide, combined with the hardness of the material itself makes the seal a tight fit and little harder to install than regular Viton seals
- PTFE material does not have 'memory' and therefore is subject to creep
- This creep allows the seal to conform to mating surfaces
- Because of the ‘creep’ characteristic, the seal relaxes a bit after installation, and doesn’t drag on the valve stem as hard as it does during installation
Fits: 84-99 Evo Big Twin; 99-04 Twin Cam; 83-03 XL Sportster (NU)