Stempelringssæt Hastings 2.745 45" 29-49

565,8 DKK

Hastings stempelringssæt STD til 2.745" cylinderboring
Læs mere

946144 Hastings
  • Cylinderboring standard: 2.745" (69.72mm)
  • Kompressions- og oliering i fosfateret (parkerized) gråt støbejern
  • Til tidlig stempeltype (1929–1949) med oliering i ét stykke i støbejern
  • Første ring: 2.3mm (3/32")
  • Oliering: 3.2mm (1/8")

Passer ikke til stempler af den senere type fra 1950–1973. Mål højden på stempelringssporene i stemplet for at sikre pasform.

Passer til: 45" 29-49

2.745" bore piston ring set. STD

  • Comes with parkerized cast gray iron compression and oil rings
  • Used with early style 1929-1949 type pistons with the one-piece cast iron oil ring
  • Std cyl. bore: 2.745" (69.72mm)
  • 1st ring: 2.3mm (3/32)
  • Oil ring: 3.2mm (1/8")
  • Note: OEM 1950-1973 pistons are equipped with 1/16" (1.6mm) 1st. & 2nd rings and late style 3/16" (4.75mm) 3-piece flex-vent style oil rings for improved oil control, for these Hastings rings see 1950-1973 Flathead model years
  • Above mentioned rings will not fit the 1950-1973 new type pistons
  • Tech tip: Piston grooves vs piston rings
  • It's not difficult to determine if a Hastings piston ring set will fit a certain piston
  • You should measure the height of the piston groove in the piston itself
  • Ring heights are listed for reference
  • For each oversize cylinder diameter will increase with .010" (0.254mm)
  • The standard bore of the cylinder is listed for reference. (Tech tip information provided by Hastings Manufacturing Company, Inc.)

Fits: 29-49 45" (750cc) Flathead (NU)