Stempelsæt S&S 9 1CR 3-1/2" +.020 1340cc/80" Shovel 79-84

4 167,6 DKK

S&S smedet stempelsæt til 80"-motorer, +.020"
Læs mere

531770 S&S
  • Smedet stempelsæt til 80" Big Twin-motorer
  • Boring: 3-1/2" (+.020") med standard 4-1/4" slaglængde
  • Kompressionsforhold: 9:1 (53 cc dome)
  • Avanceret legering og stempelskørtprofil for stille gang og lang levetid
  • Stempelboltshøjde (deck height): 1.270"
  • Indeholder stempler, stempelringe, stempelbolte og clips
  • Anbefalet stempelspil: stram pasform .0030" til .0035", løs pasform .004" til .005"
  • Fremstillet i USA

Kræver plejlstænger med en længde på 7.440" (standardlængde). Ved brug af tidligere plejlstang med længde 7.470" øges kompressionsforholdet med cirka et halvt trin, og frigangen mellem stempel og topstykke skal kontrolleres omhyggeligt. Montering bør udføres af en kyndig mekaniker, og standardprocedurer for indkøring skal følges.

Passer til: 1340cc/80" Shovel 79-84

OEM-nr.: 24281-74A, 24281-41A

Piston Kit 80" Stock Big Twin

  • For 80" stock big twin motors
  • Forged pistons for superior strength
  • Piston kits include set of pistons, rings, wristpins, and clips
  • Wrist pin deck height 1.270"
  • Made in the U.S.A.
  • Requires the use of connecting rods with a rod length of 7.440"(standard length OEM #24281-74A connecting rods); use of earlier connecting rod with rod length of 7.470" (OEM # 24281-41A) will result in a slight increase in the compression ratio of about one-halfpoint, and may also result in clearance problems (check all piston to cylinder head clearances carefully when using early style rods).
  • 3-1/2" bore 9:1CR piston kit. +.020"
  • High 9:1 (53cc dome) compression ratio
  • Fits as a direct replacement for 1340 (80") Shovelhead models, 3-1/2" bore with stock 4-1/4" stroke
  • These S&S forged pistons come in an advanced alloy and skirt profiles, resulting in a quiet engine and long life, previously only achievable with cast pistons
  • This is an excellent choice to overhaul your stock 1340cc Shovel with a higher compression piston
  • Note: S&S piston fit recommendations: Close fit .0030" to .0035", loose fit .004" to .005"
  • Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components, prior to installation
  • It is of importance that a knowledgeable mechanic will install & make adjustments as required
  • The rider must follow standard break-in and riding procedures for overhauled engines

Fits: 79-84 1340cc/80" Shovel (NU)