Lastudligner blinklys Elektronikboks Axel Joost Elektronik Vari justerbar
Elektronikboks Vari Load justerbar digital lastudligner blinklys
Læs mere
- Programmerbar lastudligner, der gør det muligt at bruge LED-blinklys på alle motorcykler
- Justerbar last i 50 trin fra 0 watt op til ca. 10 watt via programmeringskablet
- Den indstillede værdi gemmes automatisk, når kablet frakobles, og bevares ved næste start
- Indbygget LED viser den indstillede værdi og lyser konstant ved maks.- eller minimumsniveau
- Forhindrer fejlkoder i ECU og problemer med originalt blinklysrelæ
- Mål: 56 mm x 37 mm x 17 mm
- Hus i vandtæt støbt ABS-plast
- Tilslutninger: indgange 0,14 mm², udgange 0,75 qmm
Modulet tilsluttes dine blinklys og skal bruges sammen med blinklys, der trækker maksimalt 10W i alt. Vari Load kan også bruges som værktøj på værkstedet til at måle den rigtige modstand for et specifikt anvendelsesområde ved hjælp af tabellen i manualen.
VARI LOAD DIGITAL LOADEQUALIZER
- The Vari Load is a programmable Load-Equalizer that affords you to use LED Flasher in any bike.
- The Vari Load's power is adjusted using the thin blue cable.
- Simply hold the blue cable against +12 volts and the load will slowly increase in 50 steps up to approximately 10 watts.
- If you hold the blue cable against ground, the load will decrease until it reaches 0 watts.
- As soon as you disconnect the cable from ground or +12 volts, the set load value is saved and recalled the next time you turn it on.
- A complete cycle through all available power values ??takes approximately 20 seconds.
- The built-in LED flashes up to 50 times when the power value changes, indirectly indicating the set value through its number of flashes.
- As soon as one of the two limits (0 watts or approximately 10 watts) is reached, it lights up continuously.
- Dimensions:56 mm x 37 mm x 17 mm
- Body material:ABS
- Input voltage range:7 - 18 Volt
- Connections:Inputs 0,14 mm², Outputs 0,75 qmm
- Output power range: Between 2 x 1 Watt and 2 x 15 Watt
- Maximum ambience temperature:80 degree Celsius
- Axel Joost Elektronik, 'Vari Load' adjustable load equalizer
- It is simply connected to the turn signals
- The load is 50-step variable by touching the 'programming cable' to ground (less load) or to positive +12V (more load), after which it is automatically saved
- This will make this set-up compatible with any requirement of the bike to prevent the ECU triggering trouble codes or any issue with the OEM turn signal relay
- Body material: ABS waterproof molded
- Note: This module should be used with turn signals that pull a maximum of 10W total
- Note: The Vari Load can also be used as a tool in the workshop
- Then you will then know what resistor to use for that specific application
- A printed table with resistors is listed the manual