Balancevægte Motion Pro 144 7 sort stål universal
Motion Pro selvklæbende balancevægte i sort stål, 144-pak
Læs mere
- Fremstillet af stål, helt blyfri
- Sort pulverlakeret finish, passer perfekt til sorte fælge
- Selvklæbende segmenter, der sidder sikkert på både egerfælge og støbte fælge
- Indeholder 144 stk. vægte fordelt på 12 strimler med 12 segmenter pr. strimmel
- Hvert segment vejer 7 gram (1/4 oz.) og måler 20,4 mm x 12,5 mm (0,5" x 0,75")
- Ideel størrelse tilpasset motorcykelbrug
Monteres ved en temperatur på mindst 60 grader Fahrenheit på en helt ren og tør fælg fri for olie og opløsningsmidler. Motion Pro anbefaler rengøring med et vandbaseret rengøringsmiddel efterfulgt af isopropanol for at sikre optimal vedhæftning. Brug ikke oliebaserede produkter som WD-40 til at fjerne gamle limrester.
Passer til: Universal
Wheel Weights
- 1/8 oz. segments measure 0.4" x 0.51" for proper alignment when used in combination with Motion Pro's 1/4 oz. weights
- Weights stick securely to spoked or cast wheels
- 1/4 oz. segments measure 0.5" x 0.75"
- EU: 3,54 g segments measure 1,02 cm x 1,30 cm for proper alignment when used in combination with Motion Pro's 7,09 g weights
- EU: 7,09 g segments measure 1,27 cm x 1,91 cm
- 144 x 7 gram wheel weights. Black steel
- 12 strips with 12 segments per strip
- Self adhesive segments
- Black powder coated finish is perfect for black wheels
- Ideal size for motorcycle use
- Made from steel, lead free
- 20.4mm x 12.5mm, horizontal orientation
- Note installation recommendations: When applying wheel weights to a wheel, the wheel must be clean, dry, free of solvents and oils and at a minimum temperature
- Motion Pro recommends using a water based cleaner like Formula 409 to remove grease and dirt, and then wipe down the wheel with Isopropyl Alcohol to make sure of a clean and dry surface for application of the wheel weights
- Minimum temperature for application of wheel weights should be at least 60 degrees Fahrenheit
- Some solvents and contact cleaners may leave a residue behind that will prevent proper adhesion of the wheel weights
- Removal of old adhesive can be easily accomplished with a citrus based solvent, do not use products like WD40 to remove the old adhesive, as it will leave a significant oily residue behind that will prevent proper adhesion
- Temperatures below 60 degrees F will not allow proper adhesion of the wheel weights, and keep in mind that any solvents used will evaporate slower at lower temperatures, so allow more time at low temps when cleaning wheels
Fits: Universal