Gaskabel Mueller
Mueller indvendigt gaskabel til 1" styr
Læs mere
- Indvendigt gassystem til et rent styr uden synlige kabler
- Sekslejret konstruktion med fire kuglelejer og to PTFE-glidelejer
- Fremstillet med hundrededele millimeters præcision for minimalt spil
- Special Bowden-kabel (135 cm, kan afkortes efter behov)
- Fungerer med 1" styr med kabelgennemføringer og almindelige blinklys til styrende
- Den smalle del, der monteres i styret, er 22,3 mm og kan drejes efter behov
- Passer til både aluminiums- og gummihåndtag
- Leveres med to M6-bolte og monteringsvejledning
Montering kræver afskæring af styrets højre side, og sporet til betjeningen skal begynde tidligst 150 mm fra styrets højre ende. Højre håndtag erstattes af et rent venstre håndtag (medfølger ikke). Installationsværktøjssæt (art.nr. 950384) samt Loctite medium og extra strong sælges separat.
Passer til: De fleste styr med 1" diameter
| Material | Aluminum |
| Färg | Black- Silver |
| Tillverkarens Art. Nr. | 170-5 |
| Produkt-typ | Throttle |
Internal Throttle Cable
- Combines ultimate riding comfort and a cable-free look
- Six-fold bearing with four ball bearings and two plain bearings
- Manufactured with an accuracy of hundredths of a millimeter for minimal play
- Thanks to special Bowden cable (135 cm, can be shortened as desired), even with the most extreme handlebars and ape hangers operate smoothly
- Works with all 1" handlebars with cable grommets and common handlebar end turn signals
- Includes throttle adjustment screw for easy readjustment of throttle play
- Suitable for aluminum and rubber grips
- Groove for mounting the armature must start at 150 mm at the earliest (measured from the right end of the handlebar).
- During assembly, the right handle with throttle cable mount is omitted and is replaced with a clean left handle (not included).
- Müller, internal throttle
- A heavy working throttle is not what you want
- At Müller no less then 4 ball bearings and 2 PTFE bushings are used for a no friction, minimal play throttle experience
- The narrow part that fits inside the handlebar is 22.3mm which can be machined in a lathe to the required diameter for a perfect fit
- Single cable action
- Installs with 2 included M6 bolts
- Comes complete with installation instructions
- Note: Cutting of the right side handlebar is required
- Note: An installation tool kit is separately available as 950384
- Loctite medium and extra strength is advised and must be purchased separately
Fits: Most 1" diameter handlebars