Effektsæt S&S 124" Twin Cam Hot Set-Up med topstykke sort Touring 99-06, Dyna 99-05

83 959,2 DKK

S&S 124" Hot Set Up trimsæt til ubalancerede motorer
Læs mere

09030950 S&S
  • Opgraderer original 88" til 124" kapacitet med bibeholdt originalt krumtaphus
  • S&S Super Stock 91 cc topstykker og cylindre med 4.125" boring
  • Smedet stempelsæt med flad top, der giver 10.8:1 i kompressionsforhold
  • S&S svinghjulssæt med 4.625" slaglængde
  • S&S 640 Easy Start-knastaksler med tandhjulsdrift
  • Inkluderer S&S justerbare stødstænger, premium ventilløftere og rulle-vippearme
  • Sort krympelak med bearbejdede køleribber
  • Fremstillet i USA

Til ubalancerede Twin Cam-motorer (passer ikke til '06 Dyna). Ikke kompatibel med original tænding eller originalt gasspjældhus, kræver højydelses-ECU og større gasspjældhus (som S&S 58 mm), alternativt tændingssystem med justerbar tændingskurve og stor karburator (som S&S Super G). S&S anbefaler JIMS krumtaphusindsats (MCS 978519) og Timken-leje (MCS 508960) til 03–17 Twin Cam, monteringsværktøj fås som MCS 978517.

Passer til: FLT/Touring 99-06

Färg Black
Tillverkarens Art. Nr. 900-0564
Produkt-typ Performance Kit

124" Hot Set Up Engine Performance Kit

  • For non-balanced Twin Cam models
  • Converts a stock engine to 124" using the stock crankcases
  • Include S&S Super Stock 91 cc cylinder heads , 4.125” bore cylinders, forged big bore flattop pistons, S&S 4.625” stroke flywheel assembly, S&S 640 gear drive Easy Start cams, S&S premium tappets, S&S adjustable pushrods, roller rocker arms, and all hardware, gaskets and instructions
  • Made in the USA
  • EFI system must be recalibrated.
  • Fuel or ignition system not included.
  • All clearances and assembly specifications will need to be checked.
  • Although the engine is 0.960" taller than stock, there are no frame clearance problems, and a stock EFI throttle body will fit because the manifold mounting surfaces of the heads have been specially machined to fit a stock length manifold.
  • Black wrinkle painted with highlighted fins
  • Complete set with all that's required to transfer your engine into a horsepower spitting monster
  • Will upgrade your stock 88" to 124" capacity
  • Kit comes complete with stroker flywheels, big bore cylinder & flat-top piston kit that gives a 10.8:1 CR with the included 91cc high flow heads
  • The 640 Easy Start gear driven cams provide the lift required to let this engine breathe but insures easy turn-over with stock starter & battery
  • Note 2: You will build a serious high performance engine
  • It is therefore not compatible with stock ignition and a stock (too small) throttle housing
  • A large throttle housing, as the 558678 S&S 58mm single bore unit, is advised and high performance ECU is required
  • Carbureted engines will require a ignition system with adjustable advance curves and large carburetor, as the S&S Super G or similar
  • Kits are machined to be compatible with stock manifolds
  • Note 3: S&S recommends MCS 978519 JIMS crankcase bearing insert, for 03-17 Twin Cam models, to replace the stock roller bearing for the stronger early style Timken bearing
  • See MCS 978517 for required JIMS tool
  • The correct Timken bearing can be ordered as MCS 508960 / OEM 9028

Not for '06 Dyna.

Fits: 99-06 FLT/Touring; 99-05 Dyna (NU)


Lignende produkter

Trimsats S&S 132" Touring 17-upp 310-1403A
Trimsats S&S 132" Touring 17-upp 310-1402A
Trimsats S&S 132" Touring 17-upp 310-1401A
Trimsats S&S 132" Touring 17-upp 310-1400A
Trimsats S&S H-D 17-upp 310-1399A
S&S Tuningsæt S&S H-D 17- 310-1399A
09040233
49 838,7 DKK
Trimsats S&S H-D 17-upp 310-1398A
S&S Tuningsæt S&S H-D 17- 310-1398A
09040231
49 838,7 DKK