Effektsæt S&S 124" Twin Cam Hot Set-Up med topstykke sort Dyna 06-17, Touring 07-16

82 096,2 DKK

S&S Hot Set Up 124" trimsæt til ubalancerede motorer
Læs mere

09030951 S&S
  • Opgraderer original 96" eller 103" motor til 124" kapacitet i eksisterende krumtaphuse
  • Komplet sæt med 4.125” borede cylindre, smedet stempelsæt med flad top og 4.625” slaglængde på svinghjul
  • Giver et kompressionsforhold på 10.8:1 med de medfølgende Super Stock 91 cc topstykker
  • Inkluderer S&S 640 Easy Start knastaksler med tandhjulsdrev, premium løftere, justerbare stødstænger og rullevippearme
  • Sort krøllelak (black wrinkle) med bearbejdede finner
  • Pakninger, monteringsdele og instruktioner medfølger
  • Fremstillet i USA

Til ikke-balancerede Twin Cam-motorer, passer ikke til Twin-Cooled eller Trike/trehjulede modeller (pga. høj kompression). Kræver omkalibrering af EFI eller tilpasset tændingssystem og stor karburator (f.eks. S&S Super G) samt større gashåndtagshus (f.eks. 58 mm). Brændstof- og tændingssystem medfølger ikke. S&S anbefaler Timken-krumtaphuslejer med JIMS lejeindsats (MCS 978519) og værktøj (MCS 978517) til 03–17 modeller.

Passer til: Dyna 06-17

Färg Black
Produkt-typ Performance Kit
Tillverkarens Art. Nr. 900-0568

124" Hot Set Up Engine Performance Kit

  • For non-balanced Twin Cam models
  • Converts a stock engine to 124" using the stock crankcases
  • Include S&S Super Stock 91 cc cylinder heads , 4.125” bore cylinders, forged big bore flattop pistons, S&S 4.625” stroke flywheel assembly, S&S 640 gear drive Easy Start cams, S&S premium tappets, S&S adjustable pushrods, roller rocker arms, and all hardware, gaskets and instructions
  • Made in the USA
  • EFI system must be recalibrated.
  • Fuel or ignition system not included.
  • All clearances and assembly specifications will need to be checked.
  • Although the engine is 0.960" taller than stock, there are no frame clearance problems, and a stock EFI throttle body will fit because the manifold mounting surfaces of the heads have been specially machined to fit a stock length manifold.
  • Black wrinkle painted with highlighted fins
  • Will upgrade your stock 96" or 103" engine to 124" capacity
  • Kit comes complete with stroker flywheels, big bore cylinder & flat-top piston kit that gives a 10.8:1 CR with the included 91cc high flow heads
  • The 640 Easy Start gear driven cams provide the lift required to let this engine breathe but insures easy turn-over with stock starter & battery
  • Kit adds .096" to engine height
  • Note 2: You will build a serious high performance engine
  • It is therefore not compatible with stock ignition and stock (too small) throttle housings
  • A large throttle housing, as the 558678 S&S 58mm single bore unit, and high performance ECU is required
  • Carbureted engines will require a ignition system with adjustable advance curves and large carburetor, as the S&S Super G or similar
  • Note 3: S&S recommends MCS 978519 JIMS crankcase bearing insert, for 03-17 Twin Cam models, to replace the stock roller bearing for the stronger early style Timken bearing
  • See MCS 978517 for required JIMS tool
  • The correct Timken bearing can be ordered as MCS 508960 / OEM 9028

Not for use on twin cooled motors. Will fit '06 Dyna. Not recommended for compression ratios higher than 10:1 for Tri Glide or other three wheel models (including conversions) due to extra loads caused by the lugging nature of these bikes. Detonation and subsequent engine damage may result.

Fits: 06-17 Dyna; 07-16 FLT/Touring (Excl. Twin-Cooled models) (NU)


Lignende produkter

Trimsats S&S 132" Touring 17-upp 310-1403A
Trimsats S&S 132" Touring 17-upp 310-1402A
Trimsats S&S 132" Touring 17-upp 310-1401A
Trimsats S&S 132" Touring 17-upp 310-1400A
Trimsats S&S H-D 17-upp 310-1399A
S&S Tuningsæt S&S H-D 17- 310-1399A
09040233
49 838,7 DKK
Trimsats S&S H-D 17-upp 310-1398A
S&S Tuningsæt S&S H-D 17- 310-1398A
09040231
49 838,7 DKK