Svinghjul S&S 4-3/8" Twin Cam 99-06

19 823,7 DKK

S&S tredelt svinghjul med 4-3/8" slaglængde
Læs mere

09210524 S&S
  • Fremstillet i 4140-stål med integrerede hovedaksler og 1,671" krumtapsstift
  • Passer direkte i originale krumtaphuse uden modifikationer
  • Slaglængde: 4-3/8"
  • Afbalanceret til en samlet stempelvægt på 1035 gram
  • Konstrueret til brug med Timken-konvertering (leveres uden lejebane)
  • Muliggør udskiftelige lejebaner i plejlstængernes nedre ende
  • Fremstillet i USA

Beregnet til 93", 96", 103", 106", 110" og 117" motorer med original- eller S&S-stempler. Kræver Timken-leje på transmissionsakslen, passer direkte på 99–02 original- og alle S&S-blokke, mens 03–17 modeller kræver Timken-konvertering (sælges separat), da rullelejer ikke godkendes af garantien. Motorer med slaglængde over 4" kan kræve S&S stempeloliedyser og modifikation af stempelskørtet for frigang.

Passer til: Twin Cam 99-06

OEM-nr.: 24004-03B, 24605-07

Material Steel
Produkt-typ Flywheel Assembly
Tillverkarens Art. Nr. 320-0361

Replacement Flywheel Assembly

  • S&S 3-piece flywheels with integral main shafts are the strongest yet, made from 4140 steel and feature a larger 1.671" crankpin
  • Fits directly in stock crankcases with no modifications
  • Made in the U.S.A.
  • Flywheel assembly without sprocket bearing race are designed for use with Timken bearing conversion (sold separately).
  • 99-06 4-3/8" stroke flywheel assembly
  • Used with 93/103/106 and 110/117 engines
  • Balanced to 1035 gram total piston weight
  • Note: Engines with strokes exceeding 4" may require S&S piston oiling jets and piston to jet clearance notches in the piston skirt to avoid contact
  • Note: S&S crankpins allow the use of replaceable bearing races in the lower end of the connecting rods
  • The first generation of S&S crankpins, in use up to 2012, were 1.500" diameter
  • The second generation crankpins, in use since 2013, have the larger 1.671" OEM diameter crankpins
  • Now S&S & OEM crankpins are identical in diameter so now S&S parts can be used to rebuild stock H-D flywheels, something that previously was not possible since H-D rebuild parts were, and are, not available
  • Note: Following is regarding 03-17 models
  • S&S has designed these flywheels to work with a Timken style sprocket shaft bearing, they will fit stock 99-02 model year and all S&S cases without modifications
  • Stock H-D 03-17 Twin Cam engines use the same sprocket shaft roller bearing as is used on the pinion shaft, a cost saving but weaker solution
  • However, S&S feels this roller bearing will not take the side loads produced in a high performance motor
  • S&S will not honor any warranty claims in an application where the OEM 24004-03B/24605-07 03-17 sprocket shaft roller bearing style bearing assembly is used
  • To upgrade to the pre-2003 style sprocket shaft bearing MCS 978517 JIMS conversion tool kit is available
  • Bearing inserts only are available as 978519, bearings only as 508960
  • Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components, prior to installation
  • It is of importance that a knowledgeable mechanic will install & make adjustments as required

For 96"/103"/106"big bore /110"/117" with stock or S&S pistons.

Fits: 99-06 Twin Cam (Excl. 2006 Dyna) (NU)


Lignende produkter

Svinghjul S&S V-Series Motor H-D 84-99
Svinghjul S&S Taper 4.375 H-D 17-23
S&S Svinghjul S&S Taper 4.375 H-D 17-23
09220164
23 328,9 DKK
Knastakselsæt S&S M8 465G Softail 18-26 558693k-ed4525c4
Fjedersæt ventil S&S .650" Twin Cam 05-17 531869k-6a8768cb