Signalhorn Denali Electromagnetic Tone
Kompakt elektromagnetiskt signalhorn med låg ton från Denali
Lue lisää
- Ljudstyrka på 113 decibel vid 3 feet, vilket är dubbelt så högt som ett vanligt 100-decibels signalhorn av skiva-typ
- Direkt plug & play-uppgradering för originalhorn med flatstiftskontakter och kapacitet för 5 ampere
- Driftspänning: 12 volt (minst 11.7 volt krävs)
- Strömförbrukning: 5 ampere
- Mått: cirka 3.25" x 3.4" x 2.5"
- Stilren helsvart design i ett stycke
- Passar på de flesta originalplatser för signalhorn
- Ej kompatibel med KTM 1190 och 1290
Om originalkontakten inte är av flatstiftstyp behöver den ersättas med flatstiftshylsor (dam). För kretsar som inte klarar 5 ampere kan en separat kabelhärva och relä användas för att ta ström direkt från batteriet. För BMW krävs kabeladapter DNL.WHS.10100, CANsmart-kontroller eller reläkabelhärva för installation (säljs separat).
Mini Electromagnetic Low Tone Horn
- At 113 decibels, the distinct low-tone sound from the DENALI SoundBomb Mini Motorcycle Horn is twice as loud as a typical 100 decibel disc horn.
- Designed to be a direct Plug & Play upgrade from your factory horn, requiring no additional relay or wiring harness as long as the original horn has blade-style electrical connections and can handle the 5 amp load.
- When stock isn't quite enough, be heard with the SoundBomb Mini.
- Some motorcycles horn circuits are not capable of powering this 5 amp horn.
- If your horn circuits' max amperage is less than 5 amps, or if you are unsure, simply add our plug-n-play harness to bypass the horn circuit and draw power directly from your battery.
- Also, add our standard relay as this is not included with the horn harnesses.
- 113 Decibels at 3 feet
- Operating voltage:12 Volts (11.7volts required)
- Power draw: 5 Amps
- Single piece design
- Dimensions: Approximately 3.25" x 3.4" x 2.5"
- Stylish all black design
- Fits in most factory horn locations
- If the original horn does not have blade-style electrical connections, the original horn connector needs to be removed and replaced with female spade connectors in order to connect to the Soundbomb Mini.
- This horn is not compatible with KTM 1190 & 1290 Motorcycles.
- If you are not using the BMW wiring adapter (DNL.WHS.10100), a CANsmart controller or plug-n-play relay harness are required for installation (sold separately)
- DISCLAIMER - Add our BMW wiring adapter (DNL.WHS.10100) for plug & play installation to BMW motorcycles.