Tändning Dynatek Single-Fire H-D 70-03

€ 252,96

Dyna S single-fire elektroniskt tändningssystem från Dynatek
Lue lisää

DS62 Dynatek
  • Single-fire-system som tänder främre och bakre cylindern oberoende av varandra
  • Ger mer exakt tändinställning per cylinder och minskar motorvibrationer
  • Eliminerar wasted spark under insugstakten för jämnare gång och ökad effekt
  • Kan användas till toppar med enkla eller dubbla tändstift (single eller dual plugged)
  • Levereras komplett med rotor
  • Tillverkad i USA

Inte för modeller med bränsleinsprutning. Kräver särskilda Dyna-tändspolar (5 Ohm rekommenderas för gata, 3 Ohm för race) och mekanisk tändförställning som köps separat. Varvräknaradapter krävs vid användning av elektronisk varvräknare.

Passar: H-D 70-03

Produkt-typ Ignition
Tillverkarens Art. Nr. DS6-2

Single-Fire Electronic Ignition System

  • All the features of the famous Dyna "S", plus the special feature of firing the front and rear cylinders independent of each other, allowing a much more accurate timing of each cylinder
  • The stock ignition system fires both cylinders at the same time, which works fine for the front cylinder but the rear receives the "wasted" spark when the cylinder has started its intake stroke; this can result in harder starting, increased engine vibration, backfire and raw fuel being spit back into the carb, all creating a power loss
  • Dyno and top-speed testing have shown a dramatic improvement in power in all areas; bikes with hotter cams show the greatest improvement
  • If you truly want to get the most out of your stock, slightly modified or all-out customized Harley-Davidson, you need a Dyna "S" single-fire ignition system
  • Not recommended for use with OEM coils.
  • This unit must be used with special Dyna coils.
  • Tach adapter is required when using an electric tach.
  • Not for fuel-injected models.
  • Made in the USA
  • Comes complete with rotor
  • Can be used for single or dual plugged heads
  • The required mechanical advance unit must be purchased separately
  • Note: Dyna coil recommendations: Dyna 5 Ohm for street use, Dyna 3 Ohm for race use
  • Intermixing different brands may cause premature failure
  • This is the way the earlier, pre-Twin Cam, engines work
  • This is the simplest system
  • The 'wasted' spark is sometimes said to be horsepower robbing
  • Two separate coils will fire the spark plugs independently and only the spark plug of the cylinder that is on compression stroke will be fired
  • It is said that these engines vibrate less and can improve power
  • The effects will become more pronounced with hotter cams and higher RPM

Fits: 70-99 Big Twin (Excl. TC) and 71-03 XL Sportster (NU)


Samankaltaiset tuotteet

Tändmodul Dynatek Dyna 2000TC-3 Sportster 04-06
Tändmodul Dynatek Dyna 2000TC-3 Twin Cam 04-06
Programmeringskit USB tändmodul Dynatek 2000i Big Twin 70-99 902528k-ed8c72e6
Tändspole Dynatek Dyna 2000i 1 Big Twin 70-99 902537k-7311927f