Kamaxelsats Feuling Hp Cooled 50″ 99.5 M8 '17-'24 Except VVT oil

€ 2 616,09

Komplett kamaxelsats Feuling HP+ med 465 Reaper-kam för Milwaukee Eight
Lue lisää

09251179 Feuling
  • Satsen innehåller oljepump, kamplatta, 465 Reaper-kamaxel, hydrauliska rull-lyftare och stötstänger i en del med .165" godstjocklek
  • Innehåller även Timken/Koyo-kamlager, pinnbultar och muttrar för vipparmar, packningar, o-ringar, ARP-fästelement, smörjmedel och Loctite
  • Ökar oljetrycket, returvolymen och motorns oljeflöde samt eliminerar wet sumping och oljiga luftfilter
  • Oljepump med magneter som skyddar kugghjul och övertrycksventil
  • Ger 15–25° lägre motortemperatur och 15–30° lägre oljetemperatur
  • 465 Reaper-kamaxeln ger stark botteneffekt med märkbara ökningar över 2 800 RPM (varvtalsområde från 1 850 RPM)
  • Tillverkad i USA

För Milwaukee Eight-motorer med oljekylning (passar inte modeller '23-'24 med 121" VVT-motor). Fungerar med originalkomponenter men svarar bra på slip-on ljuddämpare, högflödesluftfilter och trimavgassystem. Överfyll inte oljetanken, kontrollera varm oljenivå med motorcykeln i upprätt läge.

Passar: H-D 17-upp

Produkt-typ Camchest Kit
Tillverkarens Art. Nr. 7251

HP+ Camchest Kit

  • Quieter and smoother engine operation
  • Increases oil pressure, scavenge volume and engine oil flow
  • Eliminates wet sumping, blowby and oily air cleaners
  • Heavy-duty .165” wall one-piece pushrod reduces valvetrain harmonics and increase valve lift
  • Kit includes: Feuling High Volume oil pump, High Flow billet camplate, Reaper series camshaft, hydraulic roller lifters, fixed length pushrods, Timken/ Koyo cam bearing, rocker arm studs and nuts, gaskets, O-rings, ARP cam/ crank fasteners, washers, moly lube and Loctite
  • 30% more pressure gear volume over stock for M-Eight Twin-Cooled motors
  • 53% more scavenge gear volume over stock for M-Eight Twin-Cooled motors
  • 27% more pressure and scavenge gear volume over stock for M-Eight Oil-Cooled motors
  • 42% more scavenge volume with port sizing, matched passages and holes to the engine case for M-Eight Twin-Cooled motors and M-Eight Oil-Cooled motors
  • 68% more oil volume to the crankshaft and connecting rod bearing for M-Eight Twin-Cooled motors and M-Eight Oil-Cooled motors
  • Feuling test results show a 50% reduction of engine sump oil level
  • 15-25° cooler engine temperatures for M-Eight Twin-Cooled motors and M-Eight Oil-Cooled motors
  • 15-30° cooler oil temperatures for M-Eight Twin-Cooled motors and M-Eight Oil-Cooled motors
  • 10-30 more psi of oil pressure for M-Eight Twin-Cooled motors and M-Eight Oil-Cooled motors
  • Made in the USA
  • Not for '23-'24 models with 121" VVT motors.
  • FEULING M8 OIL COOLED camchest kits include all necessary components from top to bottom of the camchest conveniently packaged under 1 part #
  • These combination kits not only ensure each individual part is designed to work and function together but to do so in total harmony
  • These camchest kits take the guess work out of the ordering process and guarantees the engine builder maximum reliability, peak performance and the coolest engine and oil temperatures obtainable
  • Available in HP+ or RACE SERIES kits
  • Magnets in oil pump to help protect gears and pressure relief valve
  • Test results show 2 HP gain and 2 ft/lbs of TQ gain to the rear wheel on Milwaukee Eight
  • The 465 Reaper is an accelerator, producing solid bottom end performance with substantial gains above 2,800 RPM when compared to stock
  • This direct bolt in replacement for M8 engines can be used with stock valve springs, pushrods, lifters and exhaust
  • Will respond well with slip-on mufflers and or performance exhaust system and air cleaner
  • Use of performance valve-springs is not required but may result in a quieter, smoother running valve-train See Feuling #1107
  • This cam will also respond well with increased bore and or compression
  • Cam Part # 1343 Valve Lift Open Close Duration @ 50" lift @ TDC Lobe Centerline Intake .445 4 BTDC 23 ABDC 207 .100 99.5 Exhaust .465 50 BBDC 6 ATDC 236 .100 112 RPM range: 1,850
  • Due to the mass call volume & inquires with requests for the M8 oil pump back cover O-ring/seal groove, we’ve added the groove! (5/11/21)
  • Although Feulings in house testing on healthy engines did not show a benefit
  • The O-ring may have potential benefits in certain circumstances such as engines with higher cylinder leak down, poor subseal O-ring seal, raised sump hole & or sump plug (see M8 PRO TIP below) & looser lifter to lifter bore clearances
  • OIL LEVEL NOTE
  • DO NOT OVERFILL OIL TANK It is important to get the correct hot oil level in your bike
  • Note: The M8 oil pick up port is on the right side of the engine
  • Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank
  • We recommend the following steps to achieve proper oil level: 1
  • Check cold oil level
  • Ride the bike until operating temperature is reached
  • 3
  • Shut the bike off while still in the upright position. (This insures an accurate reading) 4
  • Add or remove oil as needed
  • HP+ camchest kit Fits: M8 Oil Cooled Engines EXEMPT FROM EMISSIONS TAMPERING REGULATIONS UNDER CARB EO# D-881-1, 50 State legal CARB compliant: CARB EO# D-881-1 Feuling dOEs not recommend tuning beyond stock emissions standards
  • Note: Special Order Product only
  • To order please contact your MCS sales representative

Includes: • HP+ High Volume Oil Pump • High Flow Billet Camplate • HP+ Hydraulic Roller Lifters • Cam Installation Kit • Reaper 465 Series Camshaft • One Piece Pushrods • Timken/Koyo Cam Bearing • Rocker Arm Studs and Nuts • Gaskets • O-Rings • ARP Cam/Crank Fasteners • Washers • Moly Lube • Loctite

Fits: M8 '17-'24 Except VVT oil cooled, Chain Drive, Includes 465 Reaper Camshafts #1343, Cam Install kit #2030, HP+ Lifters #4000, one piece pushrods #4087, HP+ oil pump #7018, HIGH FLOW camplate #8017, and ARP Rocker studs and nuts, Camplate/Oil Pump Fasteners.