Kamplatta Feuling High Flow kugghjulsdrift H-D 99-06

€ 549,63

Feuling High Flow kamstödsplatta för kammar med drevdrivning
Lue lisää

09200006 Feuling
  • Tillverkad i USA av 7075 fräst aluminium, vilket är 50 % hårdare och starkare än original kamstödsplatta
  • Matchade oljeportar, förstorad oljepumpreservoar och optimerade oljekanaler ökar oljeflödet till lyftare, kolvkylningsmunstycken, vevaxel och vevstakslager
  • Trycktestad med tätad övertrycksventil inställd på 55–60 psi
  • Ger 25°–35° lägre motortemperatur och 20°–30° lägre oljetemperatur
  • Extra oljespår och tryckmatningshål vid kamlagren för ökad smörjning, kallstartsskydd och minskat axiellt slitage
  • Ger upp till 3 hk och 4 ft/lbs vridmoment i effektökning tillsammans med Feuling Race Series oljepump
  • Tätare toleranser i kamlagerlägena för förbättrad presspassning
  • Lager och fästelement för fästplatta ingår

För kammar med drevdrivning. Passar endast tillsammans med Feuling oljepump (t.ex. 566075 HP+ eller Race Series i 99-06-utförande), passar inte original eller andra tillverkares pumpar. Passar inte 06 Dyna.

Passar: H-D 99-06

Material Aluminum
Färg Red
Tillverkarens Art. Nr. 8000
Produkt-typ Support Plate

High Flow Camplate

  • Camplate matches the oil portholes throughout the camplate to the port holes in the engine case increasing engine oil flow throughout the engine
  • Camplates are pressure tested and pressure relief valve is seated, sealed and set to pop off at 55-60 psi
  • Increase engine oil flow and volume by enlarging the oil pump reservoirs and critical oil passages
  • 25°-35° cooler engine temperatures and 20°-30° cooler oil temperatures
  • When matched with the Feuling Race Series oil pump rear wheel power gains of 3 horsepower and 4ft/lbs of torque can be achieved
  • Added cam journal oil groove for cold start up protection and increased cam journal lubrication
  • Oil pressure feed holes to front and back of cam journals to prevent excessive thrusting wear
  • Bearing and retainer plate hardware is included
  • Made in the USA
  • For use only with Feuling oil pumps.
  • For gear drive cams (incl
  • Must be used with 566075 Feuling HP+ oil pump
  • Enlarged oil pump reservoir, critical oil passages and precision matched oil port holes increase oil flow to lifters, piston cooling jets, crank shaft and connecting rod bearings
  • Made from 7075 billet aluminum, which is 50% harder & stronger than the Factory cam support plate
  • Will fit not stock or other manufacturers pumps

Camplates for '99-'06 Twin Cam (except 06 Dyna) have tighter cam bearing bore tolerances for improved press fit. Requires the use of '99-'06 style Feuling HP+ or Race Series oil pump. Not for '06 Dyna.

Fits: 99-06 Twin Cam (Excl. 2006 Dyna) with gear drive cams (NU)