Ventilfjädersats Feuling High Load Beehive .750″ Screamin' Eagle H-D 00-17
Feuling BeeHive ventilfjädersats för höga lyft
Lue lisää
- Tillverkade av spänningsavlastad konisk oval tråd med nitrerad värmebehandling och Nano Peen-polering
- Klarar kamaxellyft upp till 0.750" utan krav på urfräsning av vipparmsboxar
- Lätta 10° fjäderbrickor i Ti-17 titanlegering som reducerar ventiltågets vikt
- Satsen innehåller 4 ventilfjädrar, 4 övre titanbrickor, 4 undre brickor, 4 shims, knaster och Viton-ventiltätningar
- Fjädertryck/monteringshöjd: 170 lb vid 1.935" (0.720" lyft), 185 lb vid 1.900" (0.685" lyft), 200 lb vid 1.845" (0.630" lyft)
- Fjädertryck/monteringshöjd: 208 lb vid 1.819" (0.604" lyft), 215 lb vid 1.800" (0.585" lyft), 217 lb vid 1.789" (0.574" lyft)
- 415 lb vid 1.215" öppen höjd, coil bind vid 1.125"
- Tillverkad i USA
Passar Twin Cam Screamin' Eagle-toppar med 5/16" ventilskaft med standard knastersprår och ventilstyrningar med 0.530" ytterdiameter. Direkt ersättning utan maskinbearbetning upp till 0.574" lyft för '84-'04 Big Twin och '86-'03 XL samt upp till 0.700" lyft för '05-'17 Twin Cam, större kamaxlar kräver bearbetning av ventilstyrning för frigång. Ventilfjädrar måste monteras vid korrekt öppen höjd anpassad till kamaxelns maxlyft.
Passar: H-D 00-17
| Material | Steel |
| Produkt-typ | Spring Kit |
| Tillverkarens Art. Nr. | 1201 |
High Load Beehive Valve Springs
- Made from premium stress-relieved conical ovate wire with nitrided surface heat treatment, shot-peened surface enhancements and Nano Peen polish
- Uses a much smaller and lighter weight retainer to reduce valve weight and create quicker rev and smoother motion
- Designed to handle the highest demands of performance engines with high-lift, steep-ramped camshafts
- Allows up to 0.750" lift cams; no rocker box clearing required
- Features extremely high level of fatigue life
- Dyno proven and track tested
- Kit includes High-Load BeeHive valve springs, lightweight 10° Titanium retainers manufactured from Ti-17 alloy and micropolished for enhanced fatigue life, machined heat-treated chromoly spring seats, seat shims, valve locks and a set of premium Viton valve seals equipped with spring-loaded valve stem wiper system
- Made in the USA
- Seat lb/installed height:
- 170 lb at 1.935" (0.720" lift)
- 185 lb at 1.900" (0.685" lift)
- 200 lb at 1.845" (0.630" lift)
- 208 lb at 1.819" (0.604" lift)
- 215 lb at 1.800" (0.585" lift)
- 217 lb at 1.789" (0.574" lift)
- 415 lb at 1.215" open height
- Coil bind at 1.125"
- Valve springs must be installed at the correct OPEN HEIGHT, matching max lift to the open height spec of the valve springs.
- Feuling BeeHive valve spring kit is direct replacement with no machining or rocker box clearance required. Up to .574" lift for '84-'04 Big Twin and '86-'03 XL and up to .700" lift for '05-'17 Twin Cam. Larger camshafts require valve guide machining for seal-to-retainer clearance.
- Direct replacement, installs without machining or rocker box clearancing
- High tensile chrome silicone wire with a shot-peened heat treatment and a super NexTex finish
- Kits include springs, lower collars, titanium upper collars, shims, keys and Viton seals
Fits Twin Cam Screamin' Eagle heads with 5/16" valve stems with standard keeper grooves and 0.530" diameter valve guides. Kit Includes: • 4x Springs • 4x Valve Seals • 4x Top Spring Retainers • 4x Bottom Spring Retainers • 4x Flat Washers • 4x Valve Keepers (8 Halves)
Fits: 99-17 Twin Cam with Screamin' Eagle heads with 5/16" valve stems with std. keeper and .530" diameter valve guides (NU)