Ventillyftare Jims Powerglide Steady Roll Twin Cam 99-17
Jims Powerglide Steady Roll lyftare
Lue lisää
- Tillverkade i billetstål med oljematad axel
- Steady Roll-bussning i bronslegering istället för nållager för en felsäker konstruktion
- Standard .8420" ytterdiameter
- Handhonat utrymme för hydraulisk enhet med precisionpassning
- Rullens vinkelräthet hålls inom .0002" och rullbredden har utökats
- Över 30 % ökad dynamisk lastkapacitet
- 10 % ökad smörjningskapacitet för hydraulisk enhet och toppsats samt 100 % ökning för rulle, kammar och kamlager
- Tillverkade i USA
Fungerar som en direkt uppgraderingsersättning och är konstruerade för att fungera väl även tillsammans med kamaxlar av solid stil.
Passar: 99-17 Twin Cam, 17-26 M8, 00-22 XL Sportster, 08-12 XR1200, 00-10 Buell XB, Big Twin 1999→ , Sportster 2000-2020, Buell (exc. 1125)
OEM-nr: 18538-99C, 18538-99
| Material | Steel |
| Storlek | Standard |
| Produkt-typ | Lifter |
| Tillverkarens Art. Nr. | 1827 |
-
Hämta1827-IS.pdf232.79 KB
Powerglide Steady Roll Tappets
- The same Powerglide advantage (oil-fed axle, billet steel body, precision fit hydraulics), but now incorporates a Steady Roll bronze bushing in place of the needle bearing roller
- These tappets have undergone extensive development to increase load, lubrication, hydraulic and life capacities
- Billet body
- Increased roller width
- Roller perpendicularity held to .0002"
- Hand-honed hydraulic unit cavity
- Dynamic load capacities increased over 30%
- Lubrication capacities for hydraulic unit and valve train (top end) increased 10%
- Lubrication capacities for the roller, cams and cam bearings have increased 100% for increased cooling
- Made in the U.S.A.
- Powerglide Steady Roll tappet. Standard .8420" O.D
- This is the Powerglide with a failsafe solid bronze alloy bushing instead of a regular roller bearing
- No other differences excist between the regular Powerglide and the Powerglide Steady Roll tappets
- Full bearing contact provides more stability, longer life and quieter operation due to the tighter tolerances this bushing design allows
- The major drawback of a worn needle bearing roller is they will eventually break, spilling steel needles throughout your engine
- Even when the Steady Roll bronze bushing wears out the design is failsafe
- Like the other Jims Powerglide tappets this Steady Roll version will give you a superior hydraulic function when compared with OEM style equipment, a billet steel body with hand-honed hydraulic unitcavity and an oil fed axle
- To get full power, you must have zero valve lash and eliminate collapsing of the hydraulic unit as is found in the OEM unit, also called 'the shock absorber syndrome'
- Failing to keep the valve open the full amount results in power loss
- The Jims Powerglide tappets come as close to a solid tappet as possible, but are still able to compensate for heat expansion
- They will even work well with solid style camshafts
- Fits as a direct upgraded replacement for OEM 18538-99C Standard and 17900022A High Capacity tappets
Fits: 99-17 (NU) Twin Cam; 17-26 M8; 00-22 (NU) XL Sportster; 08-12 (NU) XR1200; 00-10 (NU) Buell XB || Big Twin 1999→ , Sportster 2000-2020, Buell (exc. 1125)