Blinkersrelä Kellermann R2 lastoberoende E-märkt
Kellermann R2 lastoberoende blinkersrelä
Lue lisää
- Lastoberoende blinkersrelä som ger korrekt blinkfrekvens för glödlampor, halogen, LED eller kombinationer av dessa
- Ersätter ursprungliga 2-3-poliga blinkersreläer
- Förhindrar medblinkning hos icke-aktiverade blinkers
- Kopplingskapacitet 0,5–85 W
- Avsett för 12 V DC
- Kompakt metallhölje
- Mått: 34 x 22 x 12 mm (L/B/H) / höljesmått 30 x 30 x 10 mm
- ECE-godkänt och levereras med nödvändiga monteringskomponenter
Rekommenderas inte för varningsblinkers, och i vissa fall måste varningsblinkerfunktionen avaktiveras.
| Tillverkarens Art. Nr. | 123,97 |
Load-Independent Indicator Relay
- Flasher Relay R2: The Classic! The load-independent R2 flasher relay is the universal problem solver when using LED and halogen indicators. It replaces all original 2-3 pole flasher relays and delivers a constant and correct flashing frequency.
- Connection is simple. If following the conversion to LED indicators, the non-activated indicators also flash, then all that is required is for the relay to be connected to a left and a right indicator in order to reliably cure this problem.
- All necessary components required for installation are included.
- In certain cases the hazard warning flasher facility must be deactivated.
- Replaces the original 2-3 pole flasher relay.
- Restricts the accompanying flashing of non-activated indicators.
- Load-independent / usual flash rate.
- Switching capacity 0,5-85 watt.
- Small dimensions 34 x 22 x12 [mm] (L/W/H).
- High quality metal housing.
- Suitable for indicator switches.
- Suitable for 12 volt DC applications.
- R2 classic one turn signal flasher, ECE appr
- Housing dimensions of just 30mm long x 30mm wide x 10mm high
- Load independant and will therefore give the correct flash rate for incandescent bulbs, halogen, LED or a combination of these lights
- For 12V only
- Note: Not advised to be used with hazard lights