Effektsats S&S Hot Set Up 124″ svart H-D 06-17

€ 11 065,14

S&S 124" Hot Set Up trimsats för Twin Cam
Lue lisää

09030951 S&S
  • Uppgraderar en 96" eller 103" motor till 124" kapacitet med original vevhus
  • Komplett med S&S Super Stock 91 cc topplock och 4.125" cylindrar
  • Smidd kolvsats med platt topp som ger ett kompressionsförhållande på 10.8:1
  • S&S svänghjul med 4.625" slaglängd
  • S&S 640 Easy Start-kamaxlar med kugghjulsdrivning (gear drive)
  • S&S premium lyftare, justerbara stötstänger och rullvipparmar
  • Svart skrynkellack (wrinkle) med bearbetade flänsar
  • Tillverkad i USA

För icke-balanserade Twin Cam-motorer, passar ej Twin-Cooled och rekommenderas ej för Tri Glide eller trehjuliga modeller på grund av kompressionen. Satsen är ej kompatibel med originaltändning eller original gashandtagshus, kräver högprestanda-ECU och större spjällhus/gashandtagshus (som S&S 58 mm), alternativt tändsystem med justerbar tändkurva och stor förgasare (som S&S Super G). För 03–17 Twin Cam rekommenderas JIMS vevhusinsats (MCS 978519) och verktyg (MCS 978517) för att byta till Timken-lager (MCS 508960).

Passar: H-D 06-17

Färg Black
Produkt-typ Performance Kit
Tillverkarens Art. Nr. 900-0568

124" Hot Set Up Engine Performance Kit

  • For non-balanced Twin Cam models
  • Converts a stock engine to 124" using the stock crankcases
  • Include S&S Super Stock 91 cc cylinder heads , 4.125” bore cylinders, forged big bore flattop pistons, S&S 4.625” stroke flywheel assembly, S&S 640 gear drive Easy Start cams, S&S premium tappets, S&S adjustable pushrods, roller rocker arms, and all hardware, gaskets and instructions
  • Made in the USA
  • EFI system must be recalibrated.
  • Fuel or ignition system not included.
  • All clearances and assembly specifications will need to be checked.
  • Although the engine is 0.960" taller than stock, there are no frame clearance problems, and a stock EFI throttle body will fit because the manifold mounting surfaces of the heads have been specially machined to fit a stock length manifold.
  • Black wrinkle painted with highlighted fins
  • Will upgrade your stock 96" or 103" engine to 124" capacity
  • Kit comes complete with stroker flywheels, big bore cylinder & flat-top piston kit that gives a 10.8:1 CR with the included 91cc high flow heads
  • The 640 Easy Start gear driven cams provide the lift required to let this engine breathe but insures easy turn-over with stock starter & battery
  • Kit adds .096" to engine height
  • Note 2: You will build a serious high performance engine
  • It is therefore not compatible with stock ignition and stock (too small) throttle housings
  • A large throttle housing, as the 558678 S&S 58mm single bore unit, and high performance ECU is required
  • Carbureted engines will require a ignition system with adjustable advance curves and large carburetor, as the S&S Super G or similar
  • Note 3: S&S recommends MCS 978519 JIMS crankcase bearing insert, for 03-17 Twin Cam models, to replace the stock roller bearing for the stronger early style Timken bearing
  • See MCS 978517 for required JIMS tool
  • The correct Timken bearing can be ordered as MCS 508960 / OEM 9028

Not for use on twin cooled motors. Will fit '06 Dyna. Not recommended for compression ratios higher than 10:1 for Tri Glide or other three wheel models (including conversions) due to extra loads caused by the lugging nature of these bikes. Detonation and subsequent engine damage may result.

Fits: 06-17 Dyna; 07-16 FLT/Touring (Excl. Twin-Cooled models) (NU)


Samankaltaiset tuotteet

Trimsats S&S 132" Touring 17-upp 310-1403A
Trimsats S&S 132" Touring 17-upp 310-1402A
Trimsats S&S 132" Touring 17-upp 310-1401A
Trimsats S&S 132" Touring 17-upp 310-1400A
Trimsats S&S H-D 17-upp 310-1399A
S&S Trimsats S&S H-D 17-upp 310-1399A
09040233
€ 6 717,39
Trimsats S&S H-D 17-upp 310-1398A
S&S Trimsats S&S H-D 17-upp 310-1398A
09040231
€ 6 717,39