Vevhus S&S 3-5/8" natur Knucklehead with 3-5/8 big bore

€ 2 511

S&S Superstock vevhus i naturfinish med 3-5/8" cylinderborr
Lue lisää

512327 S&S
  • Tillverkade i 356-T6 aluminium för betydligt högre styrka än original
  • Passar för både standard ersättning och racingapplikationer
  • Levereras med förmonterade Timken-lagerbanor för transmissionsaxel, kamnållager samt ipressad och henad lagerbana för pinjongaxel
  • Maskinbearbetade vevskrapor anpassade för svänghjul med originalets 8-1/2" diameter
  • Portad vevhusventilation för maximal oljereturskapacitet
  • Frigång bearbetad för slaglängder upp till och med 5"
  • Inkluderar Timken-lager till transmissionsaxel, pinnbultar till cylinder, förnicklade vevhusbultar, vevhusnipplar, oljetryckssensor, pluggar och statorpluggskruv
  • Naturfinish

Passar inte med OEM-svänghjul, pinjongaxel eller transmissionsaxel för 36-54, då alla S&S-vevhus använder Timken-lager av senare typ (1955 och senare). För 36-55 Big Twin kan 58-81 pinjongaxel och 55-64 splinesad transmissionsaxel användas tillsammans med S&S-svänghjul med 6° kona och krysskil.

Passar: Knucklehead med 3-5/8 big bore

36-47 crankcase assembly, 3-5/8" bore. Natural

  • S&S Superstock crankcases, made from 356-T6 aluminum, are much stronger than the OEM case
  • OEM cases can/may break in high performance or even stock applications, like more than a few of us found out the hard way
  • These S&S Superstock cases can be used for both stock replacement and racing applications
  • Important to the engine builder are the substantial savings in labor when using S&S cases
  • These cases come 'set up' with sprocket shaft Timken main bearing races and cam needle bearings installed and pinion shaft main bearing race pressed in and line-honed
  • Additional parts that are supplied include Timken sprocket shaft bearings, cylinder studs, nickel plated case bolts, crankcase fittings, oil pressure sensor, timing & magnetic crankcase drain plugs and a special S&S design alternator stator plug clamp screw
  • The flywheel scrapers are machined to match the original 8-1/2" diameter flywheels
  • S&S cases maximize crankcase oil scavenging efficiency by using a 'ported' design breather passageway
  • S&S cases are clearanced up to and including 5", no additional clearancing for strokers will be necessary
  • Note: S&S crankcases for 36-54 Knuckle and Panhead models will not take OEM flywheels, pinion or sprocket shaft since late style (1955-up) Timken bearings are used in all S&S cases
  • 55-up shafts will not fit 36-54 OEM flywheels, S&S does not recommend machining 36-54 flywheels to take 55-up shafts
  • For all 36-55 B.T. applications 58-81 (MCS 512404) pinion & 55-64 (MCS 512401) splined sprocket shafts can be used with S&S flywheels, which all have a 6° shaft taper with keyway
  • Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components, prior to installation
  • It is of importance that a knowledgeable mechanic will install & make adjustments as required

Fits: 36-47 Knucklehead with 3-5/8 big bore cylinders (NU)


Samankaltaiset tuotteet

Vevhus S&S Super Stock svart H-D 84-91
Vevhus S&S Stock Generator H-D 65-69
Vevhus S&S 4.125BR 4-1/8 svart Dyna 07-17
Vevhus S&S Twin Cam A 4.125" borrning svart