Cylindersats S&S 124" Hot Set-Up silver Dyna 06-17/Touring 07-16

65 770 kr

S&S 124" Hot set-up kit med topplock till Twin Cam, silver
Läs mer

565063 S&S
  • Uppgraderar original 96" eller 103"-motor till 124" kapacitet
  • Finish i silver aluminium
  • Levereras komplett med stroker-svänghjul, big bore-cylindrar och platt kolvsats
  • Inkluderar 91cc high flow-topplock som ger 10.8:1 i kompressionsförhållande
  • 640 Easy Start kugghjulsdrivna kamaxlar ger bra andning och enkel start med originalstartmotor och batteri
  • Maskinbearbetad för att vara kompatibel med insug i originallängd
  • Ökar motorns totalhöjd med .096"

Original motorblock måste maskinbearbetas för att passa 4-1/8" big bore-cylindrar. Ej kompatibel med originaltändning eller original gashandtagshus, kräver högpresterande ECU och större gashandtagshus (som S&S 58 mm enkelspjällshus 558678), alternativt förgasare som S&S Super G och tändsystem med justerbar tändkurva. S&S rekommenderar JIMS vevhuslagerinsats (MCS 978519) och Timken-lager (MCS 508960) för 03–17 Twin Cam-modeller, monterat med JIMS verktyg (MCS 978517).

Passar: Dyna 06-17

124" Twin Cam Hot set-up kit with heads. Silver

  • With a silver aluminum finish
  • Will upgrade your stock 96" or 103" engine to 124" capacity
  • Kit comes complete with stroker flywheels, big bore cylinder & flat-top piston kit that gives a 10.8:1 CR with the included 91cc high flow heads
  • The 640 Easy Start gear driven cams provide the lift required to let this engine breathe but insures easy turn-over with stock starter & battery
  • Note 1: Stock cases must be machined to accept the larger 4-1/8" big bore cylinders
  • Kit adds .096" to engine height
  • Note 2: You will build a serious high performance engine
  • It is therefore not compatible with stock ignition and stock (too small) throttle housings
  • A large throttle housing, as the 558678 S&S 58mm single bore unit, and high performance ECU is required
  • Carbureted engines will require a ignition system with adjustable advance curves and large carburetor, as the S&S Super G or similar
  • Kits are machined to be compatible with stock length manifolds
  • Note 3: S&S recommends MCS 978519 JIMS crankcase bearing insert, for 03-17 Twin Cam models, to replace the stock roller bearing for the stronger early style Timken bearing
  • See MCS 978517 for required JIMS tool
  • The correct Timken bearing can be ordered as MCS 508960 / OEM 9028

Fits: 06-17 Dyna; 07-16 FLT/Touring (Excl. Twin-Cooled models) (NU)