Cylindersats S&S 124" Hot Set-Up svart Softail 07-17

80 660 kr

S&S Hot Set-Up Kit 124" med topplock för Twin Cam Softail
Läs mer

565149 S&S
  • Uppgraderar original 96" eller 103" motor till 124" kapacitet
  • Svart skrynkellackad finish med bearbetade flänsar
  • Inkluderar strokersvänghjul, Big Bore-cylindrar och Kolvsats med platt kolvtopp
  • 91cc High Flow-topplock som ger ett kompressionsförhållande på 10.8:1
  • Kugghjulsdrivna 640 Easy Start-kamaxlar som möjliggör start med originalstartmotor och batteri
  • Ökar motorns totala höjd med 0.096"
  • Bearbetat för att vara kompatibel med insugningsrör i originallängd

Original vevhus måste bearbetas för att passa de större 4-1/8"-cylindrarna. Ej kompatibel med originaltändning eller original gashandtagshus, kräver högpresterande ECU och större gashandtagshus (som S&S 58 mm 558678), alternativt förgasare som S&S Super G och tändsystem med justerbar tändkurva. S&S rekommenderar MCS 978519 JIMS vevhusinsats för 03-17 Twin Cam för konvertering till Timken-lager (MCS 508960, verktyg MCS 978517).

Passar: Softail 07-17

124" Twin Cam Softail hot set-up kit with heads. Black

  • Black wrinkle painted with highlighted fins
  • Will upgrade your stock 96" or 103" engine to 124" capacity
  • Kit comes complete with stroker flywheels, big bore cylinder & flat-top piston kit that gives a 10.8:1 CR with the included 91cc high flow heads
  • The 640 Easy Start gear driven cams provide the lift required to let this engine breathe but insures easy turn-over with stock starter & battery
  • Note 1: Stock cases must be machined to accept the larger 4-1/8" big bore cylinders
  • Kit adds .096" to engine height
  • Note 2: You will build a serious high performance engine
  • It is therefore not compatible with stock ignition and stock (too small) throttle housings
  • A large throttle housing, as the 558678 S&S 58mm single bore unit, and high performance ECU is required
  • Carbureted engines will require a ignition system with adjustable advance curves and large carburetor, as the S&S Super G or similar
  • Kits are machined to be compatible with stock length manifolds
  • Note 3: S&S recommends MCS 978519 JIMS crankcase bearing insert, for 03-17 Twin Cam models, to replace the stock roller bearing for the stronger early style Timken bearing
  • See MCS 978517 for required JIMS tool
  • The correct Timken bearing can be ordered as MCS 508960 / OEM 9028

Fits: 07-17 Softail (NU)