Drev Jims L77-89 vit L77-89 Big Twin
Jims piniondrev (White) för Big Twin Late 1977–1989
Läs mer
- Färgkod: White (artikelnummer 961308)
- Tillverkat av amerikanskt verktygsstål i flygkvalitet
- Precisionsbearbetat med exakta toleranser
- Mått över .105" mätpinnar: 1.4745-1.4751"
- Motsvarande kamdrev över .105" mätpinnar: 2.7334-2.7344"
- Tillverkat i USA
Avsett för Big Twin-modeller med konisk axel. Kam- och piniondrev måste matchas för rätt kuggspel, för litet spel ger ett vinande ljud medan för stort spel orsakar ett klickande eller knackande ljud. Toleransvariationer i vevhus och kamkåpa kan kräva att ett större eller mindre piniondrev används.
Passar: L77-89 Big Twin
OEM-nr: 24040-78, 24041-78, 24042-78, 24043-78, 24044-78, 24045-78, 24046-78
Pinion gear L77-89. White
- Gear size over .105" pins: 1.4745-1.4751"
- Cam gear over .105" pins: 2.7334-2.7344"
- Made from the finest American aerospace quality tool steel
- Precision machined to exact tolerances with no compromises
- Note: Cam gear fitment is essential to quiet valve train operation
- Too loose of a fit will result in a clicking noise, sometimes confused with lifter noise
- A too tight fit will produce a whining sound and premature wear
- Sizes are as follows: 961307 Orange (biggest)
- Repl
- 24040-78
- 961308 White
- 24041-78
- 961309 Yellow
- 24042-78
- 961310 Red (average)
- 24043-78
- 961311 Blue (average)
- 24044-78
- 961312 Green
- 24045-78
- 961313 Black (smallest)
- 24046-78
- Pinion gears for big twin
- Offering engine builders the most common sizes needed when installing performance cams or rebuilding motors
- Cam and pinion gears must be matched for pitch diameter to provide correct gear lash
- If the gear lash is too tight, the motor will whine; if the gear lash is too loose, the motor will knock
- Most aftermarket cams come with red color coded gears
- A cam of a certain color code usually should be used with a pinion gear of the same color code, but matching tolerance variations in the crankcase and the cam cover may reqquire the use of a larger or smaller pinion gear
- Gears are measured over two .105" gauge pins
- Made for Big Twin models with a tapered shaft
- Made in the USA
- Fits Big Twin Late 1977/1989
- Replaces HD # 24041-78
- JIMS MACHINING
Fits: L77-89 Big Twin (NU)