Kamaxelsats Feuling Cooled .200″ billet M8 '17-'24 Except VVT water

19 100 kr

Feuling Race Series 592 kamaxelsats för Milwaukee Eight (vätskekyld)
Läs mer

09251269 Feuling
  • Komplett sats med 592-kamaxel, oljepump, kamplatta, lyftare, stötstänger och lager
  • Race Series oljepump och kamplatta i billet 7075-aluminium
  • 30 % mer matningsvolym och 42 % mer returvolym än original
  • 46 % mer oljevolym till vevaxel och vevstakslager
  • Race Series hydrauliska rulllyftare med 0.200" slaglängd och långsammare bleed down-hastighet
  • 592 Reaper-kamaxel för varvtalsområde 2 750–6 350 rpm
  • Kamdata insug: .578" lyft, duration 234°, nockvinkel 97°
  • Kamdata avgas: .592" lyft, duration 264°, nockvinkel 116°

Avsedd för vätskekylda Milwaukee-Eight-motorer. Kräver högpresterande ventilfjädrar för högre lyft och belastning, justerbara stötstänger samt kontroll av alla spel vid montering. Överfyll inte oljetanken, oljenivån ska kontrolleras när motorn är varm och motorcykeln står upprätt.

Passar: M8 '17-'24 utom VVT vätske-

Produkt-typ Camchest Kit
Tillverkarens Art. Nr. 7268

Race Series Camchest Kit, Water Cooled M8

  • FEULING M8 WATER COOLED camchest kits include all necessary components from top to bottom of the camchest conveniently packaged under 1 part #
  • These combination kits not only ensure each individual part is designed to work and function together but to do so in total harmony
  • These camchest kits take the guess work out of the ordering process and guarantees the engine builder maximum reliability, peak performance and the coolest engine and oil temperatures obtainable
  • Quieter and smoother engine operation
  • Increase oil pressure, scavenge volume and engine oil flow
  • 30% more pressure gear volume over stock
  • 42% more scavenge volume with port sizing, matched passages and holes to the engine case
  • 46% more oil volume to the crankshaft and connecting rod bearing
  • 15-25 degree cooler engine temperatures
  • Reduces wet sumping, blow by and oily air cleaners
  • Magnets in oil pump to help protect gears and pressure relief valve
  • Test results show 2 HP gain and 2 ft/lbs of TQ gain to the rear wheel on Milwaukee Eight
  • NOTE: FEULING test results show a 50% reduction of engine sump oil level
  • Due to the mass call volume & inquires with requests for the M8 oil pump back cover O-ring/seal groove, we’ve added the groove! (5/11/21)
  • Although Feulings in house testing on healthy engines did not show a benefit
  • The O-ring may have potential benefits in certain circumstances such as engines with higher cylinder leak down, poor subseal O-ring seal, raised sump hole & or sump plug (see M8 PRO TIP below) & looser lifter to lifter bore clearances
  • 592 CAM - 'The big nasty' Put your big boy pants on get serious with bore size, ported cylinder heads and throttle body
  • Aggressive camshaft requiring high lift and higher load valvesprings, performance pushrods and lifters
  • High flow air cleaner and triple stepped exhaust pipe highly recommended
  • Clearances MUST be checked when installing this cam
  • Part # 1348 RPM range 2,750
  • 6,350
  • Grind: 592 Valve Lift Open Close Duration @ 50" Lobe Centerline Intake .578 20 34 234 97 Exhaust .592 68 16 264 116 Overlap: 36 Kits include: FEULING high volume Oil pump, HIGH FLOW billet Camplate, REAPER Series Camshaft, hydraulic roller lifters, fixed length pushrods, TIMKEN/KOYO cam bearing, rocker arm studs and nuts, gaskets, O-rings, ARP cam/crank fasteners, washers, moly lube and LOCTITE. -RACE SERIES Kits include a RACE SERIES oiling system: billet 7075 oil pump, RACE SERIES lifters, HIGH FLOW billet 7075 aluminum camplate
  • Billet 7075 aluminum oil pump which is 50% harder and stronger than the factory pump holding tighter tolerances under temperature, deeper scavenge kidneys over HP+ oil pump
  • RACE SERIES hydraulic lifters have a full .200" of total travel designed with a slower bleed down rate to handle heavy valve spring pressures, increase engine RPM before valve float and feature increased roller clearance for steep ramped camshafts and clearance for the M8 front exhaust camshaft lobe flange
  • DO NOT OVERFILL OIL TANK It is important to get the correct hot oil level in your bike
  • Feuling recommends running the oil level 90%-99% full when hot
  • Note: The M8 oil pick up port is on the right side of the engine
  • Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank
  • We recommend the following steps to achieve proper oil level: 1
  • Check cold oil level
  • Ride the bike until operating temperature is reached
  • 3
  • Shut the bike off while still in the upright position. (This insures an accurate reading) 4
  • Add or remove oil as needed
  • RS camchest kit Fits: M8 Oil Cooled Engines Feuling dOEs not recommend tuning beyond stock emissions standards
  • Note: Special Order Product only
  • To order please contact your MCS sales representative
  • CAM KT RACE 592 M8 17+ WC | CAM KT RACE 592 M8 17+ WC

Fits: M8 '17-'24 Except VVT water cooled, Chain Drive, Includes 592 Reaper Camshafts #1348, Cam Install kit #2030, RACE SERIES Lifters #4017, one piece pushrods #4087, RACE SERIES oil pump #7021, HIGH FLOW camplate #8017, and ARP Rocker studs and nuts, Camplate/Oil Pump Fasteners.