Kamaxel Feuling Parts Reaper 508 H-D 17-upp

4 490 kr

Feuling Reaper 508 kedjedriven kamaxel för Milwaukee-Eight
Läs mer

09251283 Feuling
  • Reaper 508 kamslipning för kedjedriven drivning
  • Ger mer effekt och vridmoment i varvtalsområdet 2 250–5 900 rpm
  • Släta kamlober som minskar slitage och oljud i ventilsystemet
  • Duration insug/avgas: 237°/241,5°
  • Insugsventil öppnar/stänger: 20,5°/37°
  • Ventillyft TDC: .180"/.98.5"
  • Nocköverlapp: 38°
  • Tillverkad i USA

Utvecklad för motorer på 114" (1,87 l) eller större med ökat kompressionsförhållande. Kräver ventilfjädrar för höglyft (kompatibel med SE-topplock som har detta som standard) och kraftiga stötstänger rekommenderas starkt, gärna i en del framför justerbara. Passar inte 2023–2024 års modeller med 121"-motor.

Passar: Softail 18-26

Produkt-typ Cam
Tillverkarens Art. Nr. 1349

Reaper 508 Cam

  • Produce more power and torque in the riding RPM range, improving throttle response, acceleration and fuel mileage
  • Smooth camshaft lobe ramps are easier on valvetrain components and eliminate excessive valvetrain noise and wear
  • Dyno proven and track tested
  • The Grim Reaper aggressive pulling power with a nasty sound
  • This camshaft revs up faster than the 521 grind, sounds nastier and pulls harder, but is more difficult to tune
  • The Reaper 508 grind will shine in 114" and larger cubic inch engines with added compression ratio
  • Ported cylinder heads are not required, but will complement the cam and add even more pulling power throughout the range
  • The stock throttle body produces an excellent powerband and use of a high flow throttle body will increase peak power numbers
  • A high-flow exhaust system and air cleaner is highly recommended for optimal performance
  • High-lift valve springs are required
  • Heavy-duty pushrods are highly recommended
  • 2250 - 5900 rpm range
  • Made in the USA
  • Cam specs measured in the engine on the lifter @ 0.050 using a 1.61 rocker arm ratio.
  • EU: The Reaper 508 grind will shine in 1,87 L and larger cubic inch engines with added compression ratio
  • Due to the unstable nature of this 4-valve engine design with one rocker arm activating two valve springs, Feuling highly recommends running one-piece pushrods over quick-install adjustable pushrods to maintain maximum cam/ valve lift and reduce valvetrain harmonics and associated hydraulic lifter issues.
  • Reaper M8 chain drive 508 Camshaft
  • Intake open/close: 20.5/37
  • Duration in/ex: 237/241.5
  • Valve lift TDC: .180"/.98.5"
  • Overlap 38
  • RPM range 2.250-5.900
  • Note: Compatible with SE heads since these are equipped with high lift springs as standard

Not for '23-'24 models with 121" motors.

Fits: 18-26 Softail; 17-26 FLT/Touring (excl. 23-26 VVT); 17-26 Trikes


Liknande produkter

Kamstödsplatta OE+ Feuling Milwaukee-Eight H-D 17-upp
Kamaxel Feuling Parts Reaper 538 H-D 17-upp
Kamaxelsats Feuling Parts 472 H-D 17-upp 707548k-b309c75c
Kamaxel Feuling Parts Reaper 472 H-D 17-upp 993525k-9c04a652
Kamaxel Feuling Parts Reaper 592 H-D 17-upp