Ventillyftare Feuling Race Series kort slag +.0015″ Twin Cam 99-17

2 570 kr

Feuling Race Series hydrauliska lyftare, kort fjädringsväg (+.0015" OD)
Läs mer

09280109 Feuling
  • Överdimensionerad ytterdiameter: 0.8435"–0.844" (+.0015" OD, standard är 0.8420"–0.8423")
  • Kort total fjädringsväg på 0.115" (jämfört med full fjädringsväg på 0.200")
  • Maskinbearbetad kropp i stål med långsammare avluftningshastighet (bleed down)
  • Precisionsslipat nålrullager med axel i höglegerat kromstål för låg friktion och lång livslängd
  • Kallsmidd, extra lång kolv anpassad för kontrollerad pump-up och tryckminskning
  • Snabbreagerande backventil av skivmodell med högt flöde för höga varvtal
  • Minskar ventilsvep och vibrationer i ventilsystemet för ökat varvtal och tyst motorgång
  • Säljs i set om 4

Rekommenderas för motorer med fjädersäte, tryck över 185 Lbs. och är kompatibel med FEULING HP+ eller Race Series oljepump med hög volym. Lyftarna ska justeras med 0.065"–0.070" förspänning och bör handpumpas med en tunn olja (exempelvis ATF) före montering för att avlägsna luft.

Passar: Twin Cam 99-17

Produkt-typ Lifter
Storlek +0.8435 tum - 0.844 tum
Tillverkarens Art. Nr. 4052ST

Race Series tappet set. Short travel. +.0015" OD

  • Comes with short .115" of travel
  • Oversized Diameter (0.8435"
  • 0.844")
  • Standard size is 0.8420" to 0.8423" OD
  • New revolutionary design with 0.115" of total travel vs. a full travel lifter with 0.200"
  • These hydraulic lifters will increase RPM by decreasing valve float and valve-train harmonics while maintaining a quiet engine
  • The travel reduction reduces the amount of oil that is required to fill the inside of the lifter which reduces oil aeration inside the lifter on steep, fast action high lift camshaft lobes
  • NOTE: when oil aeration is present inside the lifter, the pushrod seat drops when the lifter rolls onto the front cam lobe ramp after squeezing the aeration down thus creating a noisy poor performing lifter
  • Feuling short travel lifters should be set with 0.065"
  • 0.070" of pre-load and with the normal engine growth from heat will put the operating lifter pre load at or around half travel
  • Machined from a steel body and designed to exceed the needs of large lift camshafts and higher valve spring pressures with a slower bleed down rate
  • RACE SERIES lifters maintain proper oil flow to the top end, increase engine RPM, valve-train stability, decreasing valve float promoting maximum valve lift
  • Feuling recommends Race Series lifters for engines running higher than 185 Lbs. valve spring seat pressure
  • FEULING recommends the use of a high volume oil pump which will result in quieter, better performing lifters
  • Race Series lifters are compatible with either FEULING HP+ or Race Series oil pumps and are designed for use with both street and strip engines
  • Spin-Tron dyno developed and track proven, Made in the USA
  • Better Performance!
  • Stock replacement to full out Drag race
  • Precision ground needle roller bearing with high chromium steel axle for long life and minimal friction
  • Cold forged extra long piston, precision ground and fitted for controlled leak down and pump up
  • High flow disc style quick reacting check valve for better reaction at higher RPM
  • Available in oversized diameters – Case Savers!, Ideal side clearance is 0.001"
  • Sold in sets of 4
  • Made in the U.S.A. *FEULING RECOMMENDS PUMPING UP EACH LIFTER BY HAND PRIOR TO INSTALLATION, TO REMOVE ALL AIR AND PROVIDE A FULLY PUMPED UP LIFTER
  • USE OF A THIN WEIGHT OIL LIKE ATF IN A SQUIRT CAN WORKS WELL
  • See Feuling tool 588060 to check lifter bore diameters
  • LIFTERS RACE OS .8435 TC | LIFTERS RACE OS .8435 TC

Fits: 99-17 Twin Cam; 00-22 XL Sportster; 08-12 XR1200; 00-10 Buell XB (NU)