Tätningar ventilstyrning Kibblewhite Tefln (4-pack)

200 kr

Kibblewhite tätningssats för ventilstyrning i PTFE
Läs mer

09260327 Kibblewhite
  • Tillverkade i PTFE med tillsatser för ökad stabilitet och minskad friktion
  • PTFE-materialet behåller sina mekaniska egenskaper vid temperaturer upp till 500° F
  • Konstruktion med dubbla fjädrar ger kontinuerlig spänning mot ventilstyrning och ventilspindel
  • Kompatibel med ventilstyrningar av OEM-stil utan krav på bearbetning
  • Tätningssats för insug och avgas
  • Tillverkad i USA

PTFE-tätningar kräver en särskild monteringsteknik då de är cirka 0,020” (0,50 mm) mindre än ventilen och styrningen de ska sitta på. Användning av installationshylsa i Mylar rekommenderas vid montering över ventilspindeln (artikelnr 501823 grön 5/16", 501824 gul 11/32" eller 501825 3/8"). Pressa inte direkt ovanpå tätningen vid montering på ventilstyrningen, en 12-punkts 12 mm hylsa kan användas mot tätningens skuldra för att trycka ner den tills den bottnar.

Passar: 84-99 Evo Big Twin, 99-04 Twin Cam, 83-03 XL Sportster

OEM-nr: 18001-83, 18001-83C, 18001-83B, 18001-83A

Produkt-typ Seal
Tillverkarens Art. Nr. 71008-4
Material PTFE
OEM-nr 18001-83B

Solid PC Valve Guide Seals

  • Manufactured from PTFE
  • PTFE is known to retain its mecahnical properties at temperatures as high as 500° F
  • Fillers have been added to keep the material stable and to reduce friction
  • Twin spring design provides continous tension on the valve guide and the stem of the valve
  • Made in the USA
  • KPMI, int/exh. valve guide seal kit. PTFE
  • Manufactured with PTFE lining
  • Kibblewhite Precision Machining valve guide seals are compatible with OEM style valve guides
  • No machining required
  • Installation note: Valve guides made of PTFE require another fitment technique than 'regular' or non-PTFE valve guides, this is due to the PTFE material
  • They are typically 0.020” (0.50mm) smaller than the valve stem and guide top they’re designed to fit
  • The guide top should have a decent chamfer
  • The valve stem should have a decent chamfer, but a mylar seal installation protector / installation capsule (501823 green 5/16" / 0.3125", 501824 Yellow 11/32" / 0.34375", 501825 3/8" / 0.375") is advised for easier installation over the valve stem
  • You have to kind of roll the seal around the valve tip while exerting downward pressure to get it started
  • Don't push directly on the very top of the seal to get it on to the guide, you’ll collapse the sealing area and tear the seal
  • A 12 point 12mm socket catches the shoulder of the guide pretty well and can be used to push the seal on to the guide until it just bottoms out
  • The choker wire around sealing area and the band around the area that fits the guide, combined with the hardness of the material itself makes the seal a tight fit and little harder to install than regular Viton seals
  • PTFE material does not have 'memory' and therefore is subject to creep
  • This creep allows the seal to conform to mating surfaces
  • Because of the ‘creep’ characteristic, the seal relaxes a bit after installation, and doesn’t drag on the valve stem as hard as it does during installation

Fits: 84-99 Evo Big Twin; 99-04 Twin Cam; 83-03 XL Sportster (NU)


Liknande produkter

Ventilsäten Kibblewhite Powdered 2.007X1.562 524552k-0dac4bbd
Ventilstyrning Kibblewhite Intake kort brons H-D 84-17
Ventil Kibblewhite H-D 83-04
Kibblewhite Ventil Kibblewhite H-D 83-04
09260777
580 kr
Ventilsäten Kibblewhite Powdered 2.132X1.69 524552k-08bac798