Balansvikter Motion Pro 144 7 svart stål universal
Motion Pro självkräftande balansvikter i svart stål, 144-pack
Läs mer
- Tillverkade av stål, helt blyfria
- Svart pulverlackerad finish, passar perfekt för svarta fälgbanor
- Självhäftande segment som fäster säkert på både ekerfälgar och gjutna fälgar
- Innehåller 144 st. vikter fördelade på 12 remsor med 12 segment per remsa
- Varje segment väger 7 gram (1/4 oz.) och mäter 20,4 mm x 12,5 mm (0,5" x 0,75")
- Idealisk storlek anpassad för motorcykelbruk
Monteras vid en temperatur på minst 60 grader Fahrenheit på en helt ren och torr fälg fri från olja och lösningsmedel. Motion Pro rekommenderar rengöring med ett vattenbaserat rengöringsmedel följt av isopropanol för att säkerställa optimal vidhäftning. Använd inte oljebaserade produkter som WD-40 för att ta bort gamla limrester.
Passar: Universal
Wheel Weights
- 1/8 oz. segments measure 0.4" x 0.51" for proper alignment when used in combination with Motion Pro's 1/4 oz. weights
- Weights stick securely to spoked or cast wheels
- 1/4 oz. segments measure 0.5" x 0.75"
- EU: 3,54 g segments measure 1,02 cm x 1,30 cm for proper alignment when used in combination with Motion Pro's 7,09 g weights
- EU: 7,09 g segments measure 1,27 cm x 1,91 cm
- 144 x 7 gram wheel weights. Black steel
- 12 strips with 12 segments per strip
- Self adhesive segments
- Black powder coated finish is perfect for black wheels
- Ideal size for motorcycle use
- Made from steel, lead free
- 20.4mm x 12.5mm, horizontal orientation
- Note installation recommendations: When applying wheel weights to a wheel, the wheel must be clean, dry, free of solvents and oils and at a minimum temperature
- Motion Pro recommends using a water based cleaner like Formula 409 to remove grease and dirt, and then wipe down the wheel with Isopropyl Alcohol to make sure of a clean and dry surface for application of the wheel weights
- Minimum temperature for application of wheel weights should be at least 60 degrees Fahrenheit
- Some solvents and contact cleaners may leave a residue behind that will prevent proper adhesion of the wheel weights
- Removal of old adhesive can be easily accomplished with a citrus based solvent, do not use products like WD40 to remove the old adhesive, as it will leave a significant oily residue behind that will prevent proper adhesion
- Temperatures below 60 degrees F will not allow proper adhesion of the wheel weights, and keep in mind that any solvents used will evaporate slower at lower temperatures, so allow more time at low temps when cleaning wheels
Fits: Universal