Adapter databuss Motogadget Mo-Can H-D
Digital m-can databussadapter för Motogadget-instrument
Läs mer
- Digital adapter för direkt anslutning av Motogadget-instrument till OBD-gränssnittet
- Läser av hastighet, motorvarvtal och MIL (felkoder/motorlampa) direkt från fordonets databuss
- Inga separata givare för hastighet eller varvtal behöver monteras
- Mått: 38 mm L x 19 mm B x 13 mm H
- Vikt: ca 36 g
- Tål vibrationer och väderpåverkan samt är skyddad mot spänningstoppar
- Uppfyller alla SAE-specifikationer och är ABE-godkänd
Ansluts med rak kontakt direkt i OBD-uttaget på modeller med J1850-bussystem och 3-polig kontakt utan att generera felkoder. Matar endast hastighet, varvtal och felkoder, övriga blinkers/indikatorer måste kopplas från motorcykelns kabelhärva.
Passar: H-D 04-11
| Tillverkarens Art. Nr. | 4003000 |
| Produkt-typ | Adapter |
-
Hämtamo.can_OBD_Instructions.pdf286.13 KB
Mo-Can Data Bus Adapter
- A digital adapter for easily connecting Motogadget instruments to the OBD (On-Board Diagnosis) interface directly
- Directly reads out data such as vehicle speed, engine speed and MIL (Malfunction Indicator Light) from the vehicle data bus by H-D
- You no longer need to mount and connect sensors for vehicle speed and engine speed
- Resistant to vibrations and the effects of weather
- Electronics are protected against voltage peaks
- Simply plug in and ride
- Complies with all SAE specifications
- 38 mm L x 19 mm W x 13 mm H
- Weighs approximately 36 g
- MO.CAN speedo connector
- Enabels H-D models, equipped with the J1850-bus system, to control instruments and indicator lights
- ABE approved
- The M-CAN connector connects the Motoscope Speedo and fits straight into the OBD (data link interface/on-board diagnostic port) plug, which is normally used to read-out throuble codes on 04-11 HD-models with 3-pin connector
- You will not trigger any trouble codes
- Note: Will feed speed, RPM and trouble codes only
- Other indicator lights must be taken from the bike's wiring harness
Fits: 04-11 H-D (NU)