Gasvajer Mueller
Mueller invändig gasvajer för 1" styre
Läs mer
- Invändigt gassystem för ett rent styre utan synliga vajrar
- Sexlagrad konstruktion med fyra kullager och två PTFE-glidlager
- Tillverkad med hundradelsmillimeters precision för minimalt spel
- Speciell Bowden-vajer (135 cm, kan kortas efter behov)
- Fungerar med 1" styre med vajergenomföringar och vanliga blinkers för styrände
- Den smala delen som monteras i styret är 22,3 mm och kan svarvas vid behov
- Passar både aluminium- och gummihandtag
- Levereras med två M6-bultar och monteringsanvisning
Montering kräver kapning av styrets högra sida, och spåret för reglaget måste börja tidigast 150 mm från styrets högra ände. Höger handtag ersätts med ett rent vänsterhandtag (ingår ej). Installationsverktygssats (artikelnr 950384) samt Loctite medium och extra strong säljs separat.
Passar: De flesta styren med 1" diameter
| Material | Aluminum |
| Färg | Black- Silver |
| Tillverkarens Art. Nr. | 170-5 |
| Produkt-typ | Throttle |
Internal Throttle Cable
- Combines ultimate riding comfort and a cable-free look
- Six-fold bearing with four ball bearings and two plain bearings
- Manufactured with an accuracy of hundredths of a millimeter for minimal play
- Thanks to special Bowden cable (135 cm, can be shortened as desired), even with the most extreme handlebars and ape hangers operate smoothly
- Works with all 1" handlebars with cable grommets and common handlebar end turn signals
- Includes throttle adjustment screw for easy readjustment of throttle play
- Suitable for aluminum and rubber grips
- Groove for mounting the armature must start at 150 mm at the earliest (measured from the right end of the handlebar).
- During assembly, the right handle with throttle cable mount is omitted and is replaced with a clean left handle (not included).
- Müller, internal throttle
- A heavy working throttle is not what you want
- At Müller no less then 4 ball bearings and 2 PTFE bushings are used for a no friction, minimal play throttle experience
- The narrow part that fits inside the handlebar is 22.3mm which can be machined in a lathe to the required diameter for a perfect fit
- Single cable action
- Installs with 2 included M6 bolts
- Comes complete with installation instructions
- Note: Cutting of the right side handlebar is required
- Note: An installation tool kit is separately available as 950384
- Loctite medium and extra strength is advised and must be purchased separately
Fits: Most 1" diameter handlebars