Effektsats S&S Hot Set Up 124″ svart H-D 99-06
S&S 124" Hot Set Up trimsats för obalanserade Twin Cam
Läs mer
- Uppgraderar original 88" till 124" kapacitet med bibehållet originalvevhus
- S&S Super Stock 91 cc topplock och cylindrar med 4.125" borrning
- Smidd kolvsats med platt topp som ger 10.8:1 i kompressionsförhållande
- S&S svänghjulspaket med 4.625" slaglängd
- S&S 640 Easy Start-kamaxlar med kugghjulsdrivning
- Inkluderar S&S justerbara stötstänger, premiumlyftare och rullvipparmar
- Svart skrynkellack med bearbetade flänsar
- Tillverkad i USA
För obalanserade Twin Cam-motorer (passar inte '06 Dyna). Ej kompatibel med originaltändning eller original gashandtagshus, kräver högprestanda-ECU och större gashandtagshus (som S&S 58 mm), alternativt tändsystem med justerbar tändkurva och stor förgasare (som S&S Super G). S&S rekommenderar JIMS vevhusinsats (MCS 978519) och Timken-lager (MCS 508960) för 03–17 Twin Cam, monteringsverktyg finns som MCS 978517.
Passar: FLT/Touring 99-06
| Färg | Black |
| Tillverkarens Art. Nr. | 900-0564 |
| Produkt-typ | Performance Kit |
124" Hot Set Up Engine Performance Kit
- For non-balanced Twin Cam models
- Converts a stock engine to 124" using the stock crankcases
- Include S&S Super Stock 91 cc cylinder heads , 4.125” bore cylinders, forged big bore flattop pistons, S&S 4.625” stroke flywheel assembly, S&S 640 gear drive Easy Start cams, S&S premium tappets, S&S adjustable pushrods, roller rocker arms, and all hardware, gaskets and instructions
- Made in the USA
- EFI system must be recalibrated.
- Fuel or ignition system not included.
- All clearances and assembly specifications will need to be checked.
- Although the engine is 0.960" taller than stock, there are no frame clearance problems, and a stock EFI throttle body will fit because the manifold mounting surfaces of the heads have been specially machined to fit a stock length manifold.
- Black wrinkle painted with highlighted fins
- Complete set with all that's required to transfer your engine into a horsepower spitting monster
- Will upgrade your stock 88" to 124" capacity
- Kit comes complete with stroker flywheels, big bore cylinder & flat-top piston kit that gives a 10.8:1 CR with the included 91cc high flow heads
- The 640 Easy Start gear driven cams provide the lift required to let this engine breathe but insures easy turn-over with stock starter & battery
- Note 2: You will build a serious high performance engine
- It is therefore not compatible with stock ignition and a stock (too small) throttle housing
- A large throttle housing, as the 558678 S&S 58mm single bore unit, is advised and high performance ECU is required
- Carbureted engines will require a ignition system with adjustable advance curves and large carburetor, as the S&S Super G or similar
- Kits are machined to be compatible with stock manifolds
- Note 3: S&S recommends MCS 978519 JIMS crankcase bearing insert, for 03-17 Twin Cam models, to replace the stock roller bearing for the stronger early style Timken bearing
- See MCS 978517 for required JIMS tool
- The correct Timken bearing can be ordered as MCS 508960 / OEM 9028
Not for '06 Dyna.
Fits: 99-06 FLT/Touring; 99-05 Dyna (NU)